The pressure of the factory gas source is not a fixed value, but is determined according to the specific application requirements and equipment specifications. The following is a detailed analysis of the pressure of the plant gas source:
1. general pressure range
- common pressure range the air pressure range commonly used in factories is usually between 0.2 and 1.0 MPa. This range is suitable for many pneumatic tools, automation equipment and other general applications.
- Air supply pressure range the pressure of the factory air source is usually between 0.6 MPa and 1.0 MPa, which is a relatively general range and is suitable for most pneumatic tools and equipment.
Air supply pressure of 2. air compressor
- air supply pressure setting: The air supply pressure of the air compressor needs to be slightly higher than the equipment requirements to compensate for the pressure drop loss in the pipeline. Generally, the pressure of the air compressor station in the factory will be controlled at about 0.8 MPa to ensure that the air source pressure supplied to the equipment is between 0.6 and 0.7 MPa.
3. specific application requirements
- high Pressure Demand for certain applications, such as heavy machinery, pneumatic fixtures, or specific process equipment, higher air pressures, such as up to 1.2 MPa or higher, may be required.
- Low pressure demand conversely, for some lightweight applications, only lower air pressures, such as 0.5 MPa or less, may be required.
4. influencing factors
the actual air pressure at the plant can also be affected by a number of factors, including:
- factory Environment: such as the specific layout of the factory, ventilation conditions, etc.
- Altitude: The low air pressure in high altitude areas may affect the performance of the air compressor.
- Climatic conditions climatic conditions such as temperature and humidity may also affect the operating efficiency and air pressure of the air compressor.
- Pipe material and pressure bearing capacity: The material and pressure-bearing capacity of the air supply pipe will also affect the setting of the air supply pressure. For example, if an ordinary water gas pipe is used, the supply pressure may be set to a lower value in consideration of changes in the age and pressure-bearing capacity of the pipe.
5. Summary
in summary, the pressure of the factory air source is a relatively flexible range, which needs to be determined according to specific application scenarios and equipment requirements. In the design and selection of the plant air supply system, various factors should be fully considered to ensure the stability and reliability of the system. At the same time, for specific applications such as explosion-proof positive pressure cabinets may require a specific pressure range of gas supply, but also need to be configured according to specific requirements.
