2026-04-09Views：
Generally good air compressor air filter can be used for 1500-2000 hours and must be replaced after expiration. However, if your air compressor room environment is dirty, a better air compressor filter element will be replaced in 4 to 6 months. If the quality of the air filter is general, it is generally recommended to replace it every three months.
How long does it take to change the air filter element of the air compressor?
It is better to maintain the empty filter element once a week, unscrew the gland nut, take out the empty filter element, use 0.2-0.4Mpa compressed air to blow out the dust particles on the outer surface of the empty filter element from the inner cavity of the empty filter element, and wipe the stolen goods on the inner wall of the empty filter shell with a clean cloth.
Reinstall the air filter element, and pay attention to the sealing ring at the front end of the air filter element to fit tightly with the inner end surface of the air filter housing.
The maintenance of the diesel engine intake air filter element of the diesel power screw machine should be carried out simultaneously with the air filter element of the air compressor, and the maintenance method is the same.
The air filter element is normally replaced every 1,000 to 1,500 hours. It is recommended to replace the air filter element every 500 hours in places where the environment is particularly harsh, such as mines, ceramic factories, cotton mills, etc.
When cleaning or replacing the air filter element, the components must be matched one by one to prevent foreign matter from falling into the intake valve.
At ordinary times, it is necessary to check whether the intake telescopic pipe is damaged or flat, and whether the connection port between the telescopic pipe and the air filter intake valve is loose or leaking.
In the food and beverage industry, the water-lubricated air compressor of Shanghai Grankering Group is widely used and outstanding due to its oil-free, energy-saving and environmental protection characteristics. The following is a detailed introduction to the product, combined with a comparative analysis of industry applications: Granklin Water Run
When discussing which screw air compressor is good, the water lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly the leader in the industry. Granklin Group has won wide market recognition for its excellent product performance and environmental protection characteristics. Granklin Group Student
Screw air compressor does not pump air may be caused by a variety of reasons, the following are some common reasons and their solutions: 1. air intake system failure air inlet blockage: reason: air compressor working environment is bad, there may be foreign matter blockage or suction air inlet, resulting in reduced air intake
Shanghai Granklin Group Co., Ltd. is a modern enterprise specializing in the design and manufacture of air compressors. Its main products include water-lubricated air compressors, oil-free air compressors, variable frequency air compressors, etc. As a well-known brand in the air compressor industry, Shanghai Grank
In terms of brand selection of power frequency air compressors, there are many well-known brands in the market, such as Shanghai Granklin Group. These brands have advanced production technology and rich experience, and can provide high-quality power frequency air compressors. About Shanghai Granklin Set
Air compressors are general equipment. General-purpose equipment usually refers to those versatile, versatile mechanical equipment. According to the general engineering equipment classification of mechanical and electrical engineering equipment, air compressors are clearly classified as one of the important equipment. This classification is obtained.
Automation equipment requires compressed air to work in a variety of situations. The main scenarios include but are not limited to the following aspects: Pneumatic actuators and cylinder drives: Pneumatic actuators are often used in automation equipment, such as cylinders, which generate power through compressed air., Realize the setting
The pressure of the general air compressor varies according to the use requirements and the environment. For the pressure range of ordinary air compressors, the rated working pressure can usually reach 0.7-0.8Mpa, but in actual use, the discharge pressure of most compressors is about 0.6Mpa. 1
22 kW air compressor displacement analysis-take the water lubricated air compressor of Shanghai Greenlin Group as an example. In the air compressor market, 22 kW air compressors are favored by users because of their moderate power and wide range of application scenarios. This article
Chlor-alkali chemical plant is through the electrolysis of salt water to produce chlorine, hydrogen and caustic soda factory, the use of compressed air throughout the production process is very much, can be said to be a source of power plant operation can not be separated.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
