2026-04-09Views：
There are many air compressor brands in China, and there are not many factories that can independently produce the core components of air compressors, and there are not many factories that integrate R & D, production, sales, and after-sales.
Granklin Group is a group company located in Shanghai Baoshan District Robot Industrial Park, focusing on the production of air compressors.
At present, the most popular air compressor is a water-lubricated oil-free air compressor, and the cost-performance ratio is the most suitable for large-scale deployment by enterprises in the field of oil-free air compressors.
water lubricated oil free air compressor that good?
Buy water-lubricated oil-free screw air compressor produced by Shanghai Granklin Group. Granklin GW series air compressor using water standard of pure water lubrication, the entire compression process without the participation of oil. Therefore, the air compressor provides clean compressed air without oil.
For how to choose a water-lubricated oil-free air compressor suitable for your enterprise, please contact us, sales telephone number: 189 6485 8538 contact person: Mr. Hu.
Screw air compressor is a kind of mechanical equipment, but it does not belong to food machinery. The following is a detailed distinction between the two: Screw air compressor Definition and application: Screw air compressor is a commonly used pneumatic equipment that compresses air to the required pressure through two intermeshing screws
The requirements of chemical process for compressors include the following aspects: the requirements of process parameters such as gas volume, pressure and temperature should be met. Should meet the requirements of the media characteristics. For flammable, explosive and toxic gases, the shaft seal is required to be reliable; for corrosion
The oil content standard of general air compressor varies according to the type and application scenario: general air compressor: the national standard stipulates that the liquid oil content in compressed air shall not exceed 5 mg/m & sup3;, and the oil vapor content shall not exceed 0.5 mg/m & sup3;. This standard is designed to ensure that compression
Cold dryer exhaust high temperature alarm may be caused by a variety of reasons, the following are some possible reasons and the corresponding solutions: equipment failure: condenser blockage or cleaning is not complete: this will cause the heat can not be normal, and then trigger the high temperature alarm. Should be fixed
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
The replacement cycle of air compressor oil is not fixed. It is affected by many factors, including oil type, model, working environment and frequency of use. Here are some general guidelines: Mineral oil: It is generally recommended to replace after 3 to 4 months of use
Can boot operation, can not rule out the problem is the motor. Host imbalance mainly includes: unbalanced power supply, large fluctuation of power supply, poor contact of a certain phase of contactor, and three-phase imbalance caused by motor problems. The final reason can only be known through investigation one by one.
Air compressor compressed air water, may be caused by the following reasons: 1. external air humidity affects the moisture content in the air: the air itself contains a certain amount of water molecules, especially in the humidity of the environment, the moisture content in the air is higher. When these
Air compressor management measures mainly include the following aspects: 1. daily maintenance and cleaning to keep the air compressor clean and tidy, to prevent dust and debris from entering the inside of the machine. The entry of dust and debris may affect the normal operation of the air compressor
In the context of today's rapid industrial development, air compressor as an indispensable equipment in many industrial fields, its performance and environmental protection characteristics are increasingly concerned. Traditional air compressors often rely on lubricants for sealing and cooling, which not only increases operating costs, but also may have a significant impact on
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
