2026-04-13Views：
In air compressor systems, the following components are usually considered as pressure vessels:
air storage tank: The air storage tank is an important pressure vessel in the air compressor system, which is used to store compressed air. It bears the pressure of internal compressed air, so it must have sufficient strength and sealing.
Separators: In air compressor systems, some separators are also designed as pressure vessels, especially those used to separate oil-water mixtures or solid particles. These separators need to withstand the pressure from the upstream compressed air.
Buffer tank: The buffer tank is used to balance the pulsation of the air flow at the outlet of the air compressor and stabilize the system pressure. Because it also needs to withstand the pressure of compressed air, it is also regarded as a pressure vessel.
Coolers: Coolers used in some air compressor systems, especially those involving gas or liquid cooling, may also be designed as pressure vessels because they need to withstand a certain working pressure.
Filter housing: Although the main function of the filter itself is to filter impurities, its housing may also be regarded as part of the pressure vessel in order to accommodate the filtration process and withstand a certain pressure.
It should be noted that not all components in a compressor are considered to be pressure vessels. This classification is based primarily on whether the component is designed to contain or transport a fluid (in this case, compressed air) and is subjected to significant internal pressure during operation.
In addition, specific classifications may vary by region, country, and specific engineering standards and codes. When designing and using these pressure vessels, local safety codes and standards must be strictly observed to ensure the safety and reliability of the equipment.
The start-up and shutdown sequence of the air compressor is very important to ensure the normal operation of the equipment, prolong the service life and maintain the quality of the compressed air. The following are the general steps of the startup and shutdown sequence of the air compressor: startup sequence: check the preparation worker
The core of the air source in the bottle blowing factory is the combination of water lubricated oil-free screw air compressor plus drying and multi-stage filtration. Because the bottle is in direct contact with the food, the air quality cannot tolerate the slightest sloppiness.
Estimating the amount of compressed gas in one year needs to be calculated in combination with production equipment parameters, operating time, gas fluctuations and losses, which can be achieved by equipment gas consumption statistics, unit product gas consumption or empirical estimation. The following are specific steps and examples: 1
The daily maintenance of the air compressor includes the following aspects: Regular replacement of the filter element: The filter element is a key component of the air compressor and is responsible for filtering the air entering the compressor. In order to maintain its filtering effect, it needs to be replaced regularly. At the same time, check the filter element
The specific value of the pipe network pressure of the factory air compressor is not fixed, it will be affected by many factors, including the design pressure of the air compressor, the design of the pipe network, the demand of the gas equipment and the operation status of the system. The following is the pressure on the factory air compressor pipe network
Enterprises that need to use high-pressure air compressors mainly include the following categories: Enterprises in the aviation field: High-pressure air compressors are widely used in aero-engine starting, aircraft hydraulic systems, and oxygen systems. Because the high-pressure air compressor has a light, durable,
It is suggested to allocate 110 cubic meters per minute, plus a margin of about 20% to deal with production fluctuations and pipeline leakage. That is to say, with a water-lubricated oil-free air compressor of about 130 cubic meters per minute, plus a cold dryer or a suction dryer for post-treatment, it is basically enough.
Excessive moisture in the air compressor will affect the quality of compressed air, resulting in equipment failure or production problems. The following are the reasons for excessive moisture and systematic solutions: 1. to the core reasons, when the air humidity is too high and the ambient humidity is more than 70%, the moisture in the compressed air is easy to be saturated.
Compressed air pharmaceutical and food-grade quality requirements-Shanghai Granklin Group water-lubricated screw air compressor solutions In the pharmaceutical and food industries, the quality of compressed air is directly related to the safety and hygiene of products, therefore, to meet the requirements of pharmaceutical and food products.
Dry-type oil-free machine will not have oil, because its design principle and working process do not need to use lubricating oil. Dry-type oil-free machines usually use special materials and structural design to ensure that no lubricating oil is needed to reduce the temperature during the compression process
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
