2026-04-10Views：
As an important industrial equipment, air compressor is widely used in many fields. According to its use and function, the following are some products that usually need to be matched with air compressors:
compressor controller: This is the key equipment used to monitor and control the operation of the compressor to ensure that the compressor works in a safe and efficient state.
Filter: The filter is used to filter the air entering the compressor to remove impurities and pollutants, thereby protecting the equipment and improving air quality.
Cooler: Since the compressor generates heat during operation, the function of the cooler is to cool this heat and prevent the equipment from overheating.
Air storage tank: The air storage tank is used to store the compressed air produced by the compressor. It can balance the system pressure and reduce the start and stop frequency of the compressor, thereby improving the efficiency and stability of the system.
Oil-water separator: This equipment is used to separate the wastewater and oil discharged from the compressor to protect the environment and equipment, and ensure that the discharged gas or liquid meets environmental protection standards.
Cold dryer: used to remove the moisture in the compressed air, to ensure that the air reaches a certain degree of cleanliness, to meet some of the higher air quality requirements of the application scenarios.
Various pneumatic tools: such as pneumatic drills, pneumatic screwdrivers, etc., these tools require compressed air provided by the air compressor to drive.
Gas transmission system: In the manufacturing industry, air compressors are often used to control and operate equipment, such as pneumatic conveying devices, pneumatic hydraulic systems, etc., which also require corresponding supporting products such as air pipes and joints.
In addition, depending on the specific application scenario, there may be other specific supporting products, such as spraying equipment, pneumatic jacks, etc.
In summary, there are many types of supporting products for air compressors, which are mainly selected and configured according to actual use needs.
When the gas consumption of the equipment is known, in order to select the appropriate air compressor, the following steps need to be considered to calculate the required air compressor size: Determine the total gas consumption: First, summarize the gas consumption of all equipment that needs gas. If the equipment is intermittent
How often does the air compressor maintain? This screw air compressor is generally maintained according to the following conditions. After the newly bought screw air compressor is used for a period of time, it is necessary to carry out routine maintenance. The maintenance is divided into small maintenance and large maintenance. Small maintenance only needs to replace the air compressor oil.
The maintenance cost of the screw air compressor varies due to a variety of factors, including the air compressor model, brand (imported or domestic), size, and the selected maintenance plan and service provider. Generally speaking, the maintenance cost of screw air compressor ranges from several hundred yuan to several thousand yuan.
The pressure range of compressed air for industrial use varies depending on the application scenario and the type of equipment, but there are usually the following standards: 1. General industrial pressure range General standard: The pressure of compressed air for industrial use is usually between 0.7 and 1.0 megapascals (MPa), which is suitable for most industrial scenarios.
In the technical field, "oil-free" does not mean absolutely oil-free, but means that the oil content is below a certain limit value. Generally, when the oil content is less than 0.01 mg/m & sup3;, it can be regarded as "oil-free" or reach & ldquo
Scroll compressors and screw compressors each have their own efficiency advantages, and which efficiency is high depends on a number of factors, including application scenarios, operating conditions, system design, and specific product performance. Scroll compressors are usually low to medium pressure and small to medium flow
In the automobile manufacturing industry, the difference between oil-containing and oil-free compressed air is significant, mainly reflected in the product quality, equipment life, process stability and maintenance costs of four aspects, the specific analysis is as follows: 1. product quality differences oil-containing compressed air hazards electronic components.
There is no fixed standard for the running time of the explosion-proof air compressor, because it is affected by many factors, including the design of the air compressor, the use of the environment, the load situation, the maintenance condition, etc. However, in general, high-quality explosion-proof air compressor in the design
Is the air compressor suitable for long-time work? Professional analysis and optimization suggestions In industrial production, as the core power equipment, the stability of the air compressor is directly related to the continuity and efficiency of the production line. The general concern of users is: air compressor is
The long-term non-shutdown of the air compressor does have a series of effects, which are mainly reflected in equipment wear, energy efficiency, and potential operational risks. The following is a detailed analysis of these effects: 1. equipment wear and aging compressor parts load plus
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
