2026-04-10Views：
The maintenance of variable frequency screw air compressor involves many aspects. The following are some key maintenance steps and precautions:
1. Clean and replace the filter
air filter element: It is recommended to maintain the air filter element once a week to ensure its filtering effect and prevent dust and dirt from entering the air compressor.
Oil and gas separator: clean regularly to ensure effective separation of oil and gas and avoid pollution of lubricating oil.
2. Maintenance and replacement of lubricating oil
replacement cycle: The new machine should be replaced with lubricating oil after 500 hours of operation, and then every 2000 hours. When used in harsh environments, the replacement cycle should be shortened.
Oil selection: use pure special screw oil to ensure that it has good oxidation stability, fast separation, good foam cleaning effect, high viscosity and strong corrosion resistance.
Oil level inspection: check the oil level frequently, and add new oil when the oil level is too low.
3. Maintenance and cleaning of the cooler
inspection and cleaning: Check and clean the cooler regularly to ensure its heat dissipation effect and prevent the heat dissipation performance from being reduced due to dust, oil and other impurities.
4. Maintenance of other parts
oil filter: Replace it at the same time as the lubricating oil to ensure the cleanliness of the oil.
Solenoid valve: regular inspection, such as failure should be removed in time to check and replace if necessary.
Control pipeline between oil-gas separator and unloading valve: check the pipeline and connection, and repair if there is leakage.
5. Safety and Emissions
discharge of condensed water: Condensate water should be discharged frequently during the use of lubricating oil. Generally, it should be discharged once a week, and it should be discharged once 2-3 days in high temperature climate.
Safe operation: When draining oil or replacing the oil filter, open the oil drain valve slowly to avoid the pressure belt temperature lubricating oil splashing and hurting people.
By following the above maintenance steps and precautions, the normal operation of the variable frequency screw air compressor can be ensured and its service life can be extended. At the same time, regular professional maintenance and inspection are also essential to ensure the safety and efficiency of the equipment.
Shanghai Granklin Group and its oil-free low-pressure screw air compressor have performed well in the industry and are one of your preferences. The following is a detailed analysis: 1. Shanghai Granklin Group strength enterprise background: Founded in 2009, it is located in Shanghai Baoshan District Robot Industrial Park, accounting
Air compressors are usually required to open food factories, because air compressors play a key role in food production and can meet the needs of equipment drive, process control, cleaning and disinfection.
In the field of chip manufacturing, the cleanliness of the gas source is extremely demanding, because any tiny impurities or contamination may have a serious impact on the quality and performance of the chip. Therefore, it is very important to choose a compressor that can provide high cleanliness. Shanghai Gran
Oil-injected air compressors not only drain but also drain oil, which is a heavy maintenance burden. The water-lubricated oil-free screw air compressor only needs to drain, and the drain is clean water, which is much simpler to maintain. If you are using a fuel injection machine now, don't be lazy about drainage.
For the water-lubricated oil-free variable frequency screw air compressor of Shanghai Granklin Group, a series of inspections and adjustments are usually required during the first maintenance (first maintenance) to ensure that the equipment can work normally during the initial operation phase and prevent potential problems. Because of this
The air compressor in the electroplating workshop is the core auxiliary equipment. It mainly drives multiple key links in the electroplating process by providing stable and clean compressed air, while ensuring process accuracy and production safety. The following is a detailed description of its specific role and technical requirements: 1.
The standard air pressure of factory compressed air varies according to application requirements and equipment specifications, but it can usually be summarized according to the following aspects: General industrial applications: Generally speaking, the pressure of industrial compressed air is usually between 0.7MPa and 1.0MPa.
Air compressors (air compressors) are widely used in many industries. The following are some industries that use air compressors more: Machinery manufacturing industry: Machinery processing industry: Provide power for pneumatic tools, pneumatic machinery and pneumatic control systems, Such as pneumatic drills, pneumatic screwdrivers
The national standard of vibration value of screw air compressor may vary according to different models and specifications. Generally speaking, the general vibration range of the motor is within 3 channels (that is, less than or equal to 0.03mm). For specific screw air compressor models, such as 75k
The maintenance of screw air compressor should follow the "three-level maintenance system" (daily, monthly and annual), and make a plan in combination with the use time, environmental parameters and sensor data. The following are detailed requirements: 1. daily maintenance (daily/per shift) oil level inspection
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
