2026-04-14Views：
The normal negative pressure value of the air inlet of the air compressor should generally be between 0.5 and 0.7bar. This range can ensure the normal operation of the air compressor and avoid overheating or overpressure. At the same time, the limit value of the suction negative pressure of the air compressor is about-50kPa (I. e. -0.5bar), but in actual operation, due to the influence of various factors, such as the resistance of the intake pipe and the connecting piece, and the intake filter and other factors will also affect the size of the suction negative pressure, so the actual suction negative pressure may be smaller than this limit value.
It should be noted that the air compressor of different models, specifications and usage scenarios may have different intake negative pressure standards. Therefore, in specific applications, it is recommended to refer to the technical manual of the air compressor or consult the manufacturer for the most accurate information.
In the foundry industry, air compressors are widely used in various technological processes to power casting equipment or to generate compressed air to complete specific tasks. The following are some specific applications of air compressors in the foundry industry: Pneumatic tools and equipment: foundries often make
Which is better, oil-free or oil-free air compressor-comparative analysis of water-lubricated air compressor and oil-injected air compressor of Shanghai granklin group in the air compressor market, oil-free air compressor and oil-injected air compressor are two common types. They each have advantages
Q: air compressor storage capacity to choose how many appropriate? A: according to the actual use of gas to reserve about 20%, choose air compressor and storage tank is better. The volume of the air storage tank should be between 10% and 20% of the exhaust volume of the air compressor. We generally choose 15% when
Industrial air compressor is a device that converts the mechanical energy of the prime mover into gas pressure energy, and is widely used in various fields. The following are the main functions and application areas of industrial air compressors: Main functions: Power supply: Industrial air compressors can be used for various
The cold dryer should usually be installed after the air storage tank. This configuration has significant advantages in industrial applications. The specific analysis is as follows: Pretreatment of compressed air 1. the core role of the front of the air storage tank The compressed air discharged from the screw air compressor has high temperature, high water content, and exists
The dairy industry has strict requirements on the quality of compressed air, because the quality of compressed air is directly related to the quality and safety of dairy products. Although specific compressed air quality rating standards may vary depending on national and regional, corporate standards and dairy products.
There is no absolute answer to the question of whether the air compressor is oil-free or oil-free, because it depends on the specific application requirements and scenarios. The following is a comparative analysis of oil-free air compressors and oil-free air compressors to help you make a more comprehensive decision. Oil-free air compressor
When discussing the relationship between compressed air outlet pressure and workshop pressure, we must first clarify several key points. The outlet pressure of compressed air refers to the gas pressure output by the air compressor or related equipment, while the workshop pressure refers to the pressure transmitted to the various uses of the workshop.
Whether the compressed air tank belongs to special equipment depends on its design pressure and volume. According to publicly released information, only industrial compressed air tanks with a design pressure greater than 0.1MPa are regarded as special equipment and need to be managed in accordance with specific laws and regulations.
The most advanced air compressor technology in China is mainly reflected in the following aspects: Screw air compressor technology: As an important equipment of modern industry, screw air compressor technology has been significantly developed in China. Some advanced domestic enterprises such as China
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
