2026-04-10Views：
The air tank on the air compressor belongs to the pressure vessel.
According to the Regulations on Safety Supervision of Special Equipment, a pressure vessel is a closed device that contains gas or liquid and carries a certain pressure. The scope is defined as fixed containers and mobile containers for gases with a maximum working pressure greater than or equal to 0.1MPa (gauge pressure), liquefied gases and liquids with a maximum working temperature greater than or equal to the standard boiling point. Since the air compressor storage tank needs to withstand the pressure of the internal gas and maintain its air tightness, it meets the definition of a pressure vessel.
Air compressor storage tanks are widely used in industrial production to store compressed air. Because it stores compressed gas inside, it must be able to withstand the corresponding pressure. This characteristic makes the air compressor tank classified as a pressure vessel.
In summary, the air tank on the air compressor is indeed a pressure vessel. During use, the relevant safety regulations and operating procedures should be strictly observed to ensure its safe operation.
A: Air compressor is a commonly used mechanical equipment that provides compressed air for various production processes. As the main body of air supply, air compressors have entered various enterprises to provide a steady stream of compressed air for production, processing and manufacturing.
In the field of compressed air treatment, cold dryer and suction dryer as the key post-processing equipment, each play an irreplaceable role. The water-lubricated screw air compressor produced by Shanghai Granklin Group has become a star in this field with its unique environmental protection and high efficiency characteristics.
The ground floor (0m) of the collection, storage and feeding plant is adjacent to other auxiliary facilities such as chemical water and machine repair room. This area is usually arranged with various pipes and valves for water, steam and oil systems. The pipes are relatively dense, and there are many valves that need to be inspected and operated, and there may be more
The difference between power frequency and variable frequency screw air compressor is mainly reflected in the following aspects: power frequency screw air compressor variable frequency screw air compressor working principle The motor speed is constant, and the exhaust volume is controlled by adjusting the opening of the intake valve. When used
The working pressure range of low-pressure air compressors is generally 0.2-1.0MPa(2-10bar), and the specific pressure depends on the application scenario and equipment design. The following is a detailed description: 1. pressure range analysis standard definition: low pressure air compressor refers to exhaust pressure ≤ 0.5MPa, but actual
Cold dryers (freeze dryers) are usually used in conjunction with air compressors to remove moisture from compressed air and ensure the quality of the air source. The working principle of the cold dryer is to use refrigeration technology to cool the compressed air to a certain dew point temperature, so that the water vapor in it condenses
Compressed air plays a vital role in pharmaceutical factories. Its application runs through the whole process of pharmaceutical production and is directly related to product quality and production safety. The following is a detailed description based on the characteristics and technical specifications of the pharmaceutical industry: 1. core application scenarios.
Air compressor compressed air filter maintenance cycle: air compressor compressed air filter maintenance cycle usually depends on the filter type, working environment, air quality and frequency of use and other factors. In general, filter manufacturers will provide a recommended
Oil-free compressors are widely used in industrial production, and their lubrication methods have attracted much attention. The water-lubricated screw air compressor produced by Shanghai Granklin Group has won wide recognition in the market for its unique lubrication method. Water lubrication is oil-free compression
During the start-up of the air compression system, it is recommended to operate in the following order: Start the air compressor first First, start the air compressor to enter the normal operation state. At this time, compressed air begins to generate and is initially cooled by the after-cooler, but the air still contains
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
