2026-04-10Views：
With the continuous progress of industrial technology, air compressor as an important equipment in industrial production, its performance and technology are also constantly improving. Among the many air compressors, the 0.8MPa water lubricated screw air compressor produced by Shanghai Granklin Group is favored by the market for its excellent performance and environmental protection characteristics.
Water lubricated screw air compressor is an air compressor that uses water as a lubricating and cooling medium. Compared with traditional oil-lubricated air compressors, water-lubricated screw air compressors have higher environmental protection and lower maintenance costs. Especially under the working pressure of 0.8MPa, this air compressor can maintain stable operation and provide reliable air source for various industrial applications.
Shanghai Granklin Group's 0.8MPa water-lubricated screw air compressor is designed to fully consider the actual needs of users. The equipment adopts advanced screw technology, which can operate efficiently with low noise and low vibration. At the same time, due to the use of water lubrication, the maintenance cost of the equipment is greatly reduced, which reduces the operating cost of the enterprise.
In terms of environmental protection, Shanghai Granklin Group's 0.8MPa water-lubricated screw air compressor also has outstanding performance. Water is used as a lubricating medium to avoid oil pollution and oil mist emissions, and meets environmental protection requirements. In addition, the cooling system of the equipment also uses advanced energy-saving technology to further reduce energy consumption.
In short, the 0.8MPa water-lubricated screw air compressor produced by Shanghai Granklin Group has become an ideal choice in industrial production due to its excellent performance, environmental protection characteristics and low maintenance costs. Whether in the chemical, food, medical and other industries, or in other industrial fields that require stable gas sources, this air compressor can play an excellent role.
The time that the air compressor can run for a long time depends on many factors, including the type of air compressor, the working environment, the load situation, and the maintenance. Generally speaking, the screw air compressor can run for a long time after replacing the three filters, or even
The main reasons why it is not recommended to use compressed air blowing equipment in the production line are as follows: 1. compressed air quality problems Compressed air may contain moisture, oil, dust and other impurities in the manufacturing process. If you use unfiltered and dried compressed air directly
The starting sequence of the cold dryer and air compressor is: first open the cold dryer, then open the air compressor. At the same time, the shutdown sequence is opposite to the startup sequence, that is, the air compressor is closed first, and then the cold dryer is closed. During the operation, it is necessary to pay attention to the prohibition of frequent opening and closing of the cold dryer to avoid burning out
The outlet pressure of air compressor is generally 7-10 bar (or 0.7-1.0 MPa), but this is only a rough range. The actual outlet pressure depends on many factors, including the type of air compressor (low pressure, medium pressure or high pressure air compressor), the use environment and specific needs, etc.
When starting the air compression system, it is usually recommended to open the air compressor first, and then open the cold dryer. This is because the air compressor is responsible for providing compressed air, and the cold dryer is used for further processing of compressed air, such as cooling, drying and filtering. If
The compressed air in contact with traditional Chinese medicine shall meet the core standards of oil-free, dry, clean and sterile. The specific requirements are as follows: 1. oil-free requirements Oil control: compressed air shall not contain impurities such as lubricating oil to avoid polluting traditional Chinese medicine. Generally, the oil content is extremely low, such as less than 0
Granklin oil-free air compressor is suitable for nitrogen pressurization and oxygen pressurization, and has been widely praised in the chemical, medical and food industries. Oil-free air compressor is divided according to whether compressed air contains oil or not, corresponding to oil air compressor or micro-oil air compressor.
The relationship between the gas production of the same air compressor under different pressures can be explained by the following logic and principles, the core of which is to understand the dynamic balance between the exhaust pressure, volume flow, power consumption and efficiency of the air compressor.
About 20 cubic per minute (ie 20m & sup3;/min) air compressor power, this is not a fixed value, but is affected by a variety of factors, including working pressure, brand, model and mechanical efficiency. The following is a detailed analysis of the problem: 1. power
Generally speaking, the maintenance cycle of the air compressor should be determined according to the specific equipment and production environment, but under normal circumstances, the maintenance cycle of the air compressor is 1 to 2 times a year. Specifically, the cycle of dismantling the machine for a comprehensive overhaul is once a year, while some routine inspections are carried out.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
