2026-04-10Views：
The pressure requirement of the fire air compressor varies with the specific application scenario, but in general, its pressure should meet the requirements of the fire protection system. The following are some common fire air compressor pressure range:
the pressure of this type of air compressor is usually 1.0 to 2.5 MPa (10 to 25kg/cm2), and it is necessary to select equipment with sufficient pressure to meet different fire protection requirements.
Air compressor for fire gas pipeline: in the fire gas pipeline system, the pressure of the air compressor should be able to reach the system design working pressure, generally 4.2MPa. At the same time, the system also needs to carry out pressure test, the test pressure is 1.2 times the working pressure, that is, 5.04MPa, to ensure the safety and reliability of the system.
Air compressor in automatic fire sprinkler system: this kind of air compressor is mainly used to open and close the fire valve, drainage valve and provide pressure for the nozzle. The required pressure is generally between 0.5MPa and 1.2MPa.
In general, the pressure of the fire air compressor should be determined according to the needs of the specific fire protection system and equipment. When selecting an air compressor, ensure that its pressure range can meet the maximum pressure requirements of the fire protection system, and ensure the normal operation and safety of the system.
In addition, the working pressure range of the air compressor is also affected by the model, the use of the occasion, the work requirements and the temperature and humidity of the compressed air, the use of the environment, regular maintenance and other factors. Therefore, when selecting and using a fire-fighting air compressor, various factors should be comprehensively considered to ensure that the equipment can meet the fire-fighting needs and maintain a good working condition.
Granklin oil-free air compressor: the "guardian of pure air" in the field of biomedicine In the biomedical industry, compressed air is like the "source of life" and runs through key links such as drug production, experimental research and development, and medical equipment gas supply. its
The air compressor will produce a large amount of moisture and sediment during operation. These moisture and sediment need to be discharged in time to avoid damage to the equipment. The following are some common air compressor drainage methods: 1. manual drainage to turn off the power: First, you need to turn off
The oil-free air compressor realizes lubrication through the following two core ways to ensure the efficient operation of the equipment and the pure and oil-free output air: 1. The technical principle of self-lubricating material: The key moving parts (e. g. piston rings, cylinder walls) are made of special materials that rub against each other.
In a factory environment, conventional air pressure usually refers to atmospheric pressure, that is, the pressure exerted by the air in our surrounding environment on the surface of an object per unit area. Generally speaking, the conventional air pressure of the factory is similar to the standard atmospheric pressure, which is defined as 101325 Pa S.
Technical Description of Oil-free and Oil-free Air Compressor Selection In the selection of compressed air system equipment, oil-free and oil-free technical routes have their own applicable scenarios, which need to be comprehensively evaluated in combination with specific needs. The following from the technical characteristics, economy, the field of application of three dimensions.
The moisture filtration in the air compressor is an important process, which helps to ensure the purity of the compressed air and the normal operation of the equipment. The following is a detailed explanation of the water filtration of the air compressor: 1. the reason for the moisture generated in the air compressor. During the operation of the air compressor, due
It may be that your compressed air system does not measure the ecosystem that will build energy consumption, including a series of roles such as energy consumption users (enterprises, buildings) and energy consumption managers. This has changed the previous energy-saving field of simple monitoring, transformation of the model, to provide
The difference between screw compressor and scroll compressor is mainly reflected in the following aspects: Working principle: Screw compressor: relying on the meshing movement of the male and female rotors, with the help of their teeth, tooth grooves and the inner wall of the casing, it is "V & rdquo
When the air in the air compressor contains moisture, the following methods can be adopted to deal with it: 1. install a drain valve and install a drain valve at the bottom of the air compressor cooler: the bottom of the air compressor cooler is usually provided with a drain valve, which can be opened regularly,
The main differences between the suction dryer and the cold dryer are as follows: Working principle: The suction dryer: The moisture in the compressed air is adsorbed by the adsorbent (such as silica gel, activated alumina, etc.) to achieve the drying effect. When the adsorbent is saturated, it needs to be regenerated.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
