2026-04-10Views：
The working pressure of various types of equipment is not uniform, in general:
the working pressure of the air compressor is usually in the range of 0.7MPa to 1.0MPa. In addition, the air pressure of the immovable air compressor is generally 8kg to 12kg, while the air pressure of the piston air compressor is generally about 30kg. For special needs, there are also some high-pressure air compressors, whose air pressure can even reach 500kg. But these are the pressures of work in specific situations and demands.
The working pressure of the water pump is usually between 0.2MPa and 1.6MPa.
The working pressure of the hydraulic press is generally in the range of 10MPa to 30MPa.
The working pressure of the steam boiler is usually between 0.7MPa and 3.5MPa.
The working pressure of the gas boiler is generally in the range of 0.1MPa to 1.0MPa.
The working pressure of the vacuum pump is between 0.1MPa and 0.5MPa.
It should be noted that the working pressure of the equipment will vary according to the type and specifications of the equipment, as well as the specific needs of the production process and the use environment. When determining and adjusting the working pressure of the equipment, it should ensure that the specifications and performance requirements of the equipment are met to ensure the normal operation of the equipment and extend its service life. The setting and adjustment of the working air pressure for specific equipment is best carried out by professionals with relevant knowledge and experience.
Whether the air compressor can be placed in the chemical workshop needs to be comprehensively evaluated in combination with the environmental characteristics of the workshop, equipment protection level and safety specifications. The specific analysis is as follows: Analysis of the environmental characteristics of the 1. chemical workshop Corrosive medium risk The workshop may have acid gas (such as hydrogen chloride
Aiming at the problem that the pressure fluctuation of air compressor is more than 2bar due to the large change of gas demand, combined with the industry practice and technical analysis, the following systematic solutions are provided: Analyze the coupling of demand fluctuation and pressure 1. to the core problems When the air consumption increases instantaneously, if the air compressor does not
The main uses of the 1. power industry: compressed air system for instruments, compressed air system for ash removal, compressed air system for miscellaneous factories, water treatment including boiler make-up water treatment and industrial wastewater treatment system, and equipment power pressure in hydropower stations.
Oil-free air compressors mainly rely on special lubrication methods to ensure their efficient and stable operation without the use of traditional lubricants. Specifically, oil-free air compressors can use the following lubrication methods: water lubrication: some oil-free air compressors use water
Screw type air compressor safety operation procedures. 1. The operator must be familiar with the structure, performance, working principle, operating procedures and other precautions of the air compressor. Second, the operator must undergo technical training and safety training, and only after passing the examination can he take up his post without a license.
The "oil-free" and "micro-oil" of the air compressor are two different lubrication designs, the main differences are reflected in the lubrication medium, compressed air quality, applicable scenarios and maintenance costs.
Whether the air compressor can use ordinary oil is a frequently mentioned problem. Before answering this question, we must first understand the difference between air compressor oil and ordinary oil and its characteristics. Characteristics of air compressor oil: air compressor oil is mainly used to reduce
The reason why the gas production of the screw air compressor suddenly fails to keep up may involve many aspects. The following are some possible reasons and corresponding solutions: the possible reason is that the gas consumption of the client is greater than the rated gas volume of the air compressor. The direct feedback from the user is insufficient pressure,
For the installation of 40kg pressure air compressor room, there are the following key requirements: space requirements: the machine room should have enough space to accommodate the air compressor and its ancillary equipment, such as cooling system, gas storage tank, filter device, etc., and ensure that there is enough channel width to facilitate the equipment
The implementation standards of oil-free air compressors mainly include international standards and domestic standards. The following is a detailed summary of these standards: 1. international standards: ISO8573-1: This is the international standard for oil-free air compressors, which specifies three key air quality
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
