2026-04-10Views：
The difference between oil-free screw and micro-oil screw air compressor is mainly reflected in the following aspects:
working principle and structure:
the oil-free screw air compressor does not contact with oil at all during the compression process. There is no direct contact between the rotors, there is a certain gap, and it relies on synchronous gears for transmission to ensure the gap between the rotors. At the same time, the shaft seal structure at the intake and exhaust ends completely isolates the medium gas from the bearing lubricating oil.
The micro-oil screw air compressor adopts oil injection technology. During the compression process, lubricating oil will be injected into the compression chamber to play the role of lubrication, sealing, cooling and noise reduction. The rotor usually meshes directly, does not rely on synchronous gear transmission, and the lubricating oil will participate in the entire compression process.
Scope of application and applicability:
oil-free screw air compressor is completely isolated from the medium gas and lubricating oil, which is especially suitable for places with high air quality requirements, such as food, medicine, semiconductor and other industries. In addition, because there is no lubricating oil involved in the operation of the oil-free screw air compressor, the compressed air produced is more pure.
Micro-oil screw air compressor is favored because of its good lubrication effect and wide applicability. It can operate stably in high temperature, high humidity or dust environment, and is suitable for various industrial environments. However, the compressed air produced may contain traces of oil, which is not suitable for scenarios with extremely high air quality requirements.
Maintenance cost and convenience:
oil-free screw air compressors usually have lower maintenance costs due to the avoidance of lubricating oil systems. Its structure is simple and the maintenance process is relatively easy. However, it should be noted that the purchase cost of oil-free screw air compressors may be higher, and there are certain requirements for the working environment such as temperature, humidity and dust.
The micro-oil screw air compressor requires regular replacement of lubricating oil to maintain the normal operation of the machine, which increases the complexity of maintenance work. However, its manufacturing costs and maintenance costs are relatively low, making the micro-oil screw air compressor competitive in the market.
In summary, the difference between oil-free screw and micro-oil screw air compressor is mainly reflected in the working principle, application scope and maintenance cost. Which type of air compressor to choose depends on the specific application scenarios and needs.
In the process of using the screw air compressor, some factories will have insufficient gas supply. In fact, the selection of the machine, air leakage, gas production standards, machine wear and other aspects may produce insufficient gas supply, resulting in the production workshop equipment can not operate normally.
1ppm oil content is a key indicator of compressed air quality control, the specific meaning is as follows: definition analysis ppm(parts per million): means the concentration per million parts, that is, the mass of oil particles contained in the air per million unit volume. 1ppm: equivalent to every cubic meter of air
When closing the air pressure system and the drying system, it is usually recommended to close the air compressor first, and then close the dryer. The following are the specific reasons for this recommendation: Keep the compressed air stable: Turn off the air compressor first to ensure that the system's compressed air supply during shutdown
The standard compressed air consumption of numerical control lathe (numerical control machine tool) varies depending on the equipment configuration, process requirements and production rhythm. The reference air consumption of a single numerical control machine tool is usually 0.3m & sup3;/min to 1.5m & sup3;/min, depending on the equipment work
Frequency conversion belt screw air compressor is a kind of screw air compressor with frequency conversion technology and belt drive. It has the following advantages: energy saving and high efficiency: using frequency conversion technology, the operating speed of the compressor can be adjusted according to actual needs, thereby saving electricity. with tradition
Oil-free air compressors do not use oil during their operation. This type of compressor usually uses special design and materials to ensure that there is no oil pollution during the compression process, thereby providing pure compressed air. Oil-free air compressor is especially suitable for pressure
When the gas consumption of the equipment is known, calculating the size of the air compressor required involves two key aspects: pressure and gas consumption. The following are the specific calculation steps: Determine the pressure requirement: understand the normal pressure range of all equipment, and take the maximum and minimum
The rated discharge pressure of air compressors is divided into low pressure (0.7~1.0MPa), medium pressure (1.0 ~ 10MPa), high pressure (10 ~ 100MPa) and ultra-high pressure (above 100MPa). Different pressure ranges can be selected according to different needs. Specifically, there are the following application phases
As the core power source of fermentation process, compressed air runs through the whole process such as strain cultivation, fermentation metabolism and product separation, and its quality stability and supply reliability are directly related to fermentation efficiency and product quality.
There is a close relationship between the capacity and air consumption of the air compressor. The capacity of an air compressor usually refers to the volume of air that can be compressed per unit time, while the air consumption refers to the amount of compressed air consumed by the air compressor in practical applications. Generally, empty.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
