2026-04-13Views：
The requirements of automation equipment for compressed air mainly involve pressure, flow, cleanliness and dryness to ensure the normal operation of the equipment and extend its service life. The following are the specific requirements for compressed air for automation equipment:
stable pressure: Automation equipment usually requires a stable supply of compressed air. Pressure fluctuations may affect the normal operation of the equipment, so the pressure of the compressed air needs to be kept stable within the range required by the equipment.
Sufficient flow: Automation equipment may require a large amount of compressed air when working, so the compressed air system is required to provide sufficient flow to meet the continuous work of the equipment.
Cleanliness: compressed air can not contain too many impurities, such as dust, particles, etc., these impurities may damage the precision parts of automation equipment. Therefore, it is necessary to use a filter and other equipment to purify the compressed air.
Dryness: The moisture in the compressed air may cause rust or corrosion inside the equipment and affect the service life of the equipment. Therefore, it is necessary to use a dryer to remove the moisture in the compressed air to ensure its dryness.
Low oil content: If the compressed air contains too much oil, it may cause pollution to the automation equipment, especially for some equipment that requires a high clean environment. Therefore, the oil in the compressed air needs to be controlled within a certain range.
In order to meet these requirements of automation equipment, it is usually equipped with corresponding compressed air handling systems, including air compressors, air storage tanks, filters, dryers and other equipment to ensure that the compressed air provided to the automation equipment meets the requirements of use. At the same time, the compressed air system needs to be maintained and maintained regularly to ensure its normal operation and stable performance.
The main basis for the national oil-free standard for compressed air is ISO 8573-1. According to this standard, the highest grade of oil-free compressed air, Class 0, requires an oil content of less than 0.01 mg/m & sup3;. This is the main indicator to measure whether compressed air is oil-free.
The food and pharmaceutical industries cannot cope with all scenarios with relatively clean air alone. The place in direct contact with the product must use the cleanest gear, and the auxiliary link can use the cleaner gear. Oil-free water-lubricated air compressors are a reliable choice to meet these different needs. They fundamentally solve the problem of oil pollution and make food and pharmaceutical production more comfortable.
The reasons for the slow air intake of the air compressor may involve many aspects. The following is a detailed analysis of these possible reasons: 1. intake system problems, the intake filter is clogged: after long-term use, the filter may accumulate a large amount of dust and Impurities hinder the normal entry of air, guide
Air compressor faults and treatment methods The high temperature rise of the outlet temperature or exhaust temperature of the air compressor head is a common fault in the operation of the screw air compressor. The screw air compressor often runs at high temperature, which will seriously affect the displacement and operation of the machine.
The main function of an air compressor, or air compressor, is to increase its pressure by compressing a gas through an internal mechanism. When we talk about "exhaust pressure 7kg", we are actually describing the gas pressure at the outlet of the air compressor. Here's & ldqu
Mobile air compressors are not considered special equipment in most cases. Special equipment refers to those related to life safety, dangerous equipment, such as boilers, pressure vessels (including gas cylinders, the same below), pressure pipes, elevators, lifting machinery, passenger transport
The air pressure range for factory compressed air varies depending on the application and equipment requirements, but general standards exist. The following is a detailed analysis: General criteria for 1. conventional air pressure ranges: The pressure of industrial compressed air is usually set at 0.7MPa to 1.0MPa(7 ~ 10bar).
In the air compressor industry, the commonly used English vocabulary and terminology is very rich. The following are some common English terms in the air compressor industry: 1. air compressor type piston air compressor: Piston Compressor screw air compressor: Scr
The main reasons for the use of compressed air in the fermentation process are as follows: Oxygen supply: During aerobic fermentation, microorganisms need oxygen to maintain their life activities and metabolic processes. By passing compressed air, the dissolved oxygen content in the fermentation broth can be increased, full.
Permanent magnet screw air compressors have significant advantages. The following are the advantages of permanent magnet screw air compressors: High efficiency and energy saving: Permanent magnet motors have the characteristics of high efficiency and low energy consumption. Compared with traditional motors, they can significantly reduce energy consumption. Stable operation
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
