2026-04-09Views：
Use, blow dry after the final water washing, use air compressor, as well as instruments, pneumatic tools, coating generally regular point of the factory are required.
air compressor in electroplating plant useful:
1, blowing sand before plating
2. After cleaning, blow air to remove water
3, the product is useful to spray varnish after electroplating
4, some small tanks are also useful for compressed air stirring
generally, it includes three stages: pretreatment before electroplating, electroplating and post-plating treatment.
Complete process:
1. Acid dipping & rarr; Full plate electroplating
copper & rarr; pattern transfer & rarr; acid degreasing & rarr; secondary countercurrent rinsing & rarr; micro-etching & rarr; secondary & rarr; acid dipping & rarr; tin plating & rarr; secondary countercurrent rinsing.
2. Countercurrent rinsing & rarr; Acid dipping & rarr; Graphic copper plating & rarr; Secondary countercurrent rinsing & rarr; Nickel plating & rarr; Secondary water washing & rarr; Citric acid dipping & rarr; Gold plating & rarr; Recovery & rarr;2-3 pure water washing & rarr; Drying.
plastic shell plating process:
chemical deoiling-water washing-acetone immersion-water washing-chemical roughening-water washing-sensitizing-water washing-activation-reduction-electroless copper plating-water washing-bright sulfate copper plating-water washing-bright sulfate nickel plating-water washing-bright chrome plating-water washing and drying for inspection.
Shutdown protection may be triggered when the air compressor discharge pressure is as low as 0.2-0.5MPa (about 2-5bar), the specific value varies by model and design. The following analysis is carried out from the two dimensions of conventional and water-lubricated models: 1. the basis of the typical shutdown pressure range of conventional air compressors.
The problem that the air compressor does not start due to low voltage during restart may be caused by a variety of factors. The following are some possible reasons and solutions: Possible reasons: The power supply voltage is too low: The air compressor needs a stable voltage supply to start normally. If the power supply is
The durability of the air compressor is related to its type, use environment, maintenance and other factors, so it is impossible to simply answer which type of air compressor is the most durable. However, it is possible to analyze the characteristics and use environment of different types of air compressors to help
Oil-free air compressor as an environmentally friendly compressed air equipment, its role is mainly reflected in the following aspects: 1. Environmental protection, no pollution, no lubricating oil demand: oil-free air compressor does not need to use lubricating oil in the working process, which avoids the pollution of lubricating oil to the environment and products.
Air compressor in the normal operation, vibration is inevitable, but in the operation of the vibration is too large, will cause serious harm to the air compressor, the following air compressor vibration reasons are analyzed as follows: 1. start-up operation after the vibration: unit start
Answer: Oil-free air compressor is usually water-lubricated, and the compressed gas is rich in water vapor. The better way is to remove the water vapor in the compressed gas by post-processing the cold dryer or suction dryer.
When discussing whether the oil-free screw compressor needs to be refueled, taking the water-lubricated screw air compressor products produced by the Glanklin Group as an example, we can clearly conclude that the oil-free screw compressor, especially the water Lubricated screw air compressor does not
The application of air compressor in forging industry is mainly reflected in the following aspects: power source of pneumatic forging hammer: air compressor provides power for pneumatic forging hammer to ensure that it can strike metal with appropriate strength and speed, so as to achieve accurate metal shaping. This is
In the foundry, the air compressor, as the core power equipment, plays an irreplaceable role in many key production links by providing stable and high-pressure compressed air. The specific functions are as follows: 1. the core power to drive the operation of pneumatic equipment heavy use in foundries
The noise level of screw air compressor (referred to as screw air compressor) varies depending on the model, power and operating conditions. The following is based on industry data and technical information to analyze the noise problem of screw air compressor in detail: 1. the noise level of screw air compressor
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
