2026-04-13Views：
Today, with the rapid development of air compressor technology, Shanghai Granklin Group has brought revolutionary changes to the bottle blowing industry with its water lubricated screw air compressor products. This innovation not only improves production efficiency, but also greatly reduces operating costs, becoming a highlight in the industry.
Granklin Group's water-lubricated screw air compressors use unique water lubrication technology. This technology uses water as a lubricant to replace the traditional oil lubrication method, and fundamentally solves the problem of environmental pollution caused by lubricating oil. At the same time, water lubrication also has an excellent cooling effect, which can effectively reduce the temperature during the compression process and improve the compression efficiency.
This air compressor has a reasonable structure and an ideal force balance. During operation, it has almost no radial and axial force, and only generates rotational force, which makes the machine run more smoothly, reduces vibration and noise, and improves the service life of the equipment.
In addition, the water lubricated screw air compressor also has the characteristics of high efficiency and low maintenance cost. Its simple structure and less wearing parts reduce the frequency of maintenance, saving a lot of maintenance costs for enterprises. At the same time, due to the advanced control system, the air compressor can automatically adjust the operating state under different working conditions, reduce energy consumption, and achieve the goal of energy saving and green production.
The water-lubricated screw air compressor of Shanghai Granklin Group has won wide recognition in the bottle blowing industry for its efficient, stable and environmentally friendly performance. It not only improves production efficiency, but also brings significant economic and environmental benefits to enterprises, and has become a major technological breakthrough in the field of bottle blowing air compressors.
The maintenance cycle of air compressor and cold dryer directly affects the service life and operating efficiency of the equipment, and needs to be flexibly adjusted according to the frequency of use, environmental conditions and equipment type. The following is a detailed maintenance guide: 1. air compressor maintenance cycle maintenance items routine cycle
In industrial production, the drying treatment of air compressor is an indispensable part. Among them, the suction dryer and the cold dryer as two common drying equipment, each has its own characteristics and advantages. However, for the production of water-lubricated screw air compressors produced by Shanghai Granklin Group,
The air compressor will produce a large amount of moisture and sediment during operation. If the moisture is not discharged in time, it will cause damage to the equipment. The following is the method of discharging water from the air compressor: manual drainage method: turn off the power supply of the air compressor to ensure safety.
Machining equipment usually requires compressed air, which is widely used and critical. The specific requirements and reasons are as follows: 1. the core demand for compressed air for machining equipment Power-driven pneumatic tools: such as pneumatic wrenches, pneumatic grinding wheels, pneumatic cutting machines, etc., rely on compressed air
The answer to whether the mine air compressor uses oil or electricity is that there are two driving modes. Where there is electricity, it is preferred to use electricity to drive, and where there is no electricity or it is not convenient to connect electricity, it is driven by oil. As a new lubrication method, the water-lubricated air compressor can be used in both electric and oil-driven machines. It makes the gas used in the mine cleaner and makes the daily care of the equipment easier.
When discussing which is the best permanent magnet frequency conversion screw air compressor, we have to mention the water lubricated screw air compressor produced by Shanghai granklin group. As a leader in the industry, Grantkering Group, with its excellent technical strength and innovation capabilities, has been
We need to find out what the pressure of the air is in megapascals (MPa). First of all, we need to understand the standard value of air pressure and its unit. Under standard atmospheric conditions (I. e., average conditions at sea level), the pressure of air is usually defined as 1 atmosphere (atm). 1 atm
Nitrogen in the semiconductor factory is bodyguards, cleaners, porters and air conditioners, while the water-lubricated oil-free screw air compressor is the source that provides clean raw materials for the nitrogen machine. The source is not clean, and the back is completely useless.
Whether the air compressor needs to use an explosion-proof box depends on the specific use environment and safety requirements. The following is a detailed analysis of this problem: Use environment: If the air compressor is used in a flammable and explosive environment, such as petroleum, chemical, mining, gas, etc.
Breaking, punching, piling and other operations. The use of mobile air compressor can provide high-quality compressed air, improve work efficiency, reduce working time and cost. Mining, water conservancy, transportation, shipbuilding, urban construction, energy, military and other industries: these industries are often
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
