How to automatically drain the air storage tank for air compressor

When the air compressor is in use, when the air humidity is high, there will be more water after the compressed air. If the air is dry in winter, there will be less water. If it is troublesome to put it, it is recommended to install an automatic timing discharge device, and the cost of self-operation should be 300 or 400.

According to the use of air compressor specification requirements, at least once a day in the morning drainage.

In the past, there was no regular water discharge device, and it was always necessary to remember to drain the gas tank regularly. Now the shotgun has been changed, and the automatic drain greatly simplifies manual operation.

granklin's water-lubricated air compressor produces oil-free air, but in the post-treatment we need to filter the water in the gas, and the electronic drain is essential.

It is best to drain water every day, because the moisture in the air during the working process of the air compressor will enter the air storage tank and then go to the dryer. The dryer has an electromagnetic drain that will automatically drain water, while the air storage tank generally has only one ball valve below. If water is not drained, the inside of the air storage tank will corrode and rust, resulting in shortened service life.

The air compressor we use is 100% oil-free, and the gas storage tank can also be made of stainless steel, but too much water will still affect the work.

Therefore, it is better to install a gas-water separator if possible to automatically exclude the water in the gas storage tank.