2026-04-10Views：
As we all know, the screw air compressor adopts a pre-set configuration, only a single power connection and compressed air connection, and built-in cooling system, which can greatly simplify the installation work. Its advantage lies in the use of high-capacity compression components, its rotor outer circle speed is low, to achieve high efficiency, high reliability.
Its specific advantages focus on the following aspects
1. High stability, high efficiency, low vibration and low noise.
2. The yin-yang rotor and the coordination between the rotor and the casing are set, the backflow of gas is small, there is no clearance volume, and the efficiency is high.
3. The lubricating oil injected has the functions of sealing, cooling, noise reduction and lubrication.
4, compared to the piston machine, less wearing parts, lower failure rate.
5, screw compression curve smooth, relative to the piston machine vibration is small, low noise.
6. Cooling methods are generally divided into: water cooling and air cooling.
7. The heat dissipation system adopts plate-fin structure and high-quality materials to ensure that the cooler has high pressure resistance, high heat dissipation efficiency and good corrosion resistance.
8. The air filter is overloaded, the working surface is large, and the relative service life is long.
9. The oil/gas separator adopts a new filter material, which has higher efficiency and low air oil content.
10. Intelligent controller: All operations and related data of air compressor operation are displayed on the control panel, which is easy, convenient and accurate.
All parts of the screw air compressor are designed with long life, which can save maintenance costs. However, when the working time reaches a certain stage, there will also be some faults, such as the machine does not start, excessive oil consumption, relief valve discharge, compressor does not unload, machine does not load after starting up, etc. These faults will have a certain impact on the compressor itself, so the machine needs to be cleaned and maintained at ordinary times to keep it clean and increase power.
The general maintenance of air compressors include replacing the oil filter, maintaining the intake air filter element, cleaning the cooler, and replacing the oil and gas separator. However, the above method is more cumbersome, large consumption, serious cost waste, safety factor is small, not enough to achieve the goal of cost savings.
We are now the new screw air compressor cleaning oil, it is mainly for frequent downtime of the screw air compressor, can effectively decompose attached to the inside of the machine carbon deposits, gum, after 500 hours of operation can be released, can greatly improve the safety performance of equipment operation, can effectively reduce the occurrence of safety accidents.
The functional advantages of this screw air compressor cleaning oil are reflected in the following aspects
1, the oil using imported synthetic base oil, and add anti-oxygen, anti-rust and other additives, refined.
2, the oil has good high and low temperature performance, thermal oxidation stability performance and other functions, easy to use, high safety factor.
3. Compared with other mineral oils, the flash point and natural point of this oil are about 20°C higher, and the operating temperature is also about 20°C higher than other mineral oils. It has good high temperature resistance and is relatively safe to operate at high temperatures., Can play a certain protective role for the machine.
Screw air compressor plays a very important role in life and brings great help and convenience to life. Therefore, it is also a very important thing to maintain the machine. Only when the machine itself is brand-new can the work efficiency be effectively improved. On the contrary, if the machine is damaged, it will not only greatly reduce the work efficiency, but also cause frequent failures and low safety. Therefore, choosing a suitable oil product is also a very important thing for the air compressor. It can not only maintain the machine consistently, but also improve the power and increase the income, it also extends the service life of the machine to a certain extent.
With the rapid development of China's economy, especially the continuous improvement of the level of industrialization, the development of the air compressor industry has played a great role in promoting the gap between domestic and international advanced level is getting smaller and smaller. At present, the quality level of domestic products is constantly improving.
The screw air compressor has a series of unique advantages such as simple structure, reliable operation and convenient operation, so it has been paid attention to by the industry since its birth. However, in the daily production of enterprises, it is often necessary to replace some vulnerable parts of air compressors, such
The simplest point is to see whether it contains a frequency converter, and the second is to see whether the motor changes its speed according to the actual working conditions during operation. There are many factors to look. Speed directly affects the oil pressure and high and low pressure. I can see whether there is frequency conversion in current or not. Literally understood, the speed of the variable frequency air compressor is almost the same as the fixed frequency under the working state. When the air compressor is not in the pumping state, the motor frequency will automatically drop and the input power will be reduced to achieve the effect of energy saving.
Biopharmaceutical is based on natural biological materials as the main raw material, including microorganisms, human body, animals and plants, marine organisms and so on. With the development of biotechnology, some synthetic biological agents have become the main source of raw materials for biopharmaceuticals. have pharmacological
There are two conditions for the laboratory to purchase air compressors: 1. Quiet, use equipment that is prone to noise in the laboratory, and is not friendly to laboratory staff. Excessive noise can easily lead to mood swings, irritability and impatience, affecting work efficiency.
Air compressor pressure is commonly used in kilograms or Mpa, 16kg is 1.6Mpa, this pressure is commonly used in laser cutting. The traditional piston air compressor can easily reach this pressure, and the oil screw air compressor can also reach this pressure. The water lubricated air compressor Shanghai granklin Group can reach 0.2-4Mpa.
View detailsPermanent magnet frequency conversion air compressor has become a hot spot and bright spot in the industry due to its energy-saving and high-efficiency characteristics. The original energy-consuming air compressor on the market is gradually being replaced or replaced by permanent magnet frequency conversion air compressor, which can directly bring users 20%-40% cost savings. With the section
Which is better to purchase 20 cubic variable frequency air compressor? First understand the characteristics of the permanent magnet variable frequency air compressor. What are the characteristics of permanent magnet variable frequency air compressor? 1. The essence of permanent magnet high-efficiency variable frequency is to control the rotation of the motor space magnetic field. 2. The stator winding generates a rotating magnetic field synchronized with the power frequency through three-phase alternating current
Screw air compressor has the characteristics of simple structure, small size and light weight. It has continuous exhaust, small exhaust pulsation, small vibration, and low requirements for installation foundation; few wearing parts, convenient use and maintenance; compact structure and stability Good, reliable operation, long life
Air compressor, full name air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy. It is a pressure generator for compressed air. Is one of the most commonly used in industrial and mining enterprises to provide air power equipment. Usually, the air compressor is divided into screw type air compressor, piston type air compressor and so on.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
