2026-04-10Views：
Air compressor maintenance methods and precautions are as follows:
air compressor maintenance is divided into small maintenance and large maintenance. The depth of the process components of the air compressor is the same and different. The following is a common and practical air compressor maintenance method and precautions.
1, air compressor oil filter maintenance: air compressor oil filter can remove impurities in the oil, keep the oil clean. If the air compressor oil filter is not overhauled, it will block the oil filter, increase the impurities in the oil, cause early wear and damage of the body bearing, reduce the amount of oil, and make the air compressor temperature rise. The abnormal shutdown caused by the increase of the degree will make the oil system inside the air compressor dirty and cause hidden danger to the safety of the air compressor. Air compressor oil filter maintenance method: replace the new air compressor oil filter (directly affect the main fault of the compressor, please be sure to use the original, the replacement time is 3000 hours).
2. Maintenance of air compressor oil and gas separator: The air compressor oil and gas separator can separate lubricating oil and air from the air in the compression process, and recover the lubricating oil to send out the compressed air. If the air compressor oil mist separator is not maintained, it will cause the air compressor exhaust temperature to rise (abnormal stop), overcurrent (abnormal stop), and power consumption to increase (power failure). At the same time, due to the increase in oil temperature, the oil will Accelerate deterioration on the production line, and there is a phenomenon of oil discharge (large oil consumption), such as a large amount of impurities accumulation. There will be burning accidents.
3. Maintenance of air compressor lubricating oil: The air compressor lubricating oil can lubricate, cool and seal the driving part (bearings and other parts), so that the air compressor can maximize its performance. If the air compressor lubricating oil is not maintained, it will cause the lubricating oil to deteriorate. If the compressor body performance is serious, it will cause damage to the compressor body and the oil circuit system. Dirty causes exhalation temperature to rise and abnormal cessation. Maintenance method of air compressor lubricating oil: close the air compressor, confirm that there is no pressure to discharge all the old lubricating oil (oil recovery device, oil cooler, body), and add new lubricating oil (the oil level in operation is between the oil meter H-L).
4. Air compressor air filter maintenance: Air compressor air filter can remove dust and prevent oil pollution, oil filter and oil mist separator filter element blockage. If the air filter of the air compressor is not maintained, the air output will drop and the pressure will drop, which will accelerate the speed of oil deterioration, cause the oil mist separator to block, the air compressor to stop abnormally or increase power consumption, and cause power loss. At the same time, the air compressor does not repair the air filter, the oil filter is blocked, and the impurities in the oil increase. Cause compressor body bearing early wear and damage. Air compressor air filter maintenance method: stop the air compressor to remove the air filter, clean with air and install the air filter.
Oil-free air compressor theoretically no clearance volume, single capacity, ideal isothermal compression, due to the good thermal conductivity of water, lubricating water into the compression chamber, the temperature will drop to 45 ℃, close to the suction temperature. Oil-free: water to replace oil, lubrication, cooling, sealing, noise reduction of the four effects, to provide 100 oil-free air, no pollution, the discharge of water without special treatment, in line with environmental requirements.
View detailsThe water lubricated air compressor produced by granklin group has a pressure range of 0.15-4Mpa. the exhaust flow rate is determined by the amount of air used to purchase the most appropriate number of machines. When installing the water-lubricated air compressor, the best configuration is to use stainless steel gas storage tanks, pipes, filters, etc.
View detailsThe "air compressor head" produced by "Shanghai granklin group" is used in the "water lubricated air compressor" produced and sold by itself. for the "air compressor head", an enterprise specializing in the production and manufacture of "granklin air compressor", we strictly control the quality of the "air compressor head" under the condition of completely using the self-produced "air compressor head.
1. Check whether the fuse is burned and blown, causing the circuit to fail and cannot be powered on. 2. Motor failure. The insulation layer is aged or the temperature is too high, the insulation layer is melted, so that the insulation effect is insufficient and leakage occurs. 3. The motor is locked and overcurrent. Not enough lubricant,
If it is moisture-proof maintenance, you can refer to the following methods: 1. Check whether there is water around the air compressor. Find out the foundation, geological structure, flood control facilities and emergency rescue facilities around the air compressor room in detail, and find out the hidden dangers and weak links.
Chemical industry is an indispensable industry in the process of national development. In the process of large-scale production, screw air compressor can be selected (Granklin air compressor). Granklin air compressor uses water lubrication to lubricate the air compressor head, so that the gas quality is oil-free and the gas cleanliness is high.
The water-lubricated integrated air compressor produced by Shanghai Granklin Group, the water-lubricated air compressor widely praised by users, provides users with pure oil-free compressed gas.
Oil-free air compressor, Granklin Group is engaged in the production of products. As one of the main products in the air compressor manufacturing industry, oil-free air compressor has been recognized by many customers. Many customers in the purchase of air compressors are as one of the campaign goals, so what are the advantages of oil-free air compressors?
1. After using it every day, it is necessary to check the oil level, exhaust temperature, exhaust pressure and other aspects of the screw air compressor to see if there is any abnormal situation. If the oil level is too low, it is necessary to add lubricating oil in time. In addition, there is a need
The precision equipment used in the laboratory requires relatively high gas, and "oil-free compressed air" is a necessary gas. "Water lubricated air compressor" is one of the essential equipment. In the process of laboratory construction, the gas used in different laboratories is diverse.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
