2026-04-10Views：
Granklin air compressor is suitable for laser cutting machine. Compared with traditional oil air compressor, water lubricated air compressor has higher gas purity. Laser cutting products are suitable for high-end industry processing, intelligent robots, etc.
Water lubricated air compressor has high gas production and clean gas without oil.
A single large air volume air compressor is much better than multiple small air volume air compressors in terms of overall energy efficiency, which is a common feature of any type of air compressor.
therefore, the principle of air compressor selection with energy efficiency is to choose large rather than small, but according to various levels, the choice of large air compressor is also limited by the following factors:
(1) For the limitation of the power system, the first thing that must be considered is the application voltage, and whether the impact of the large air compressor on the power grid is sufficient when starting must be considered.
(2) With the seasonal, time difference or other factors causing the change of compressed air to exceed a certain range (depending on the type of machine), or the actual use of air volume is likely to be far lower than the estimated value before the purchase of air compressor, a single air compressor will inevitably cause waste of energy due to emission or unloading. Multiple air compressors have greater flexibility to accommodate changes in dosage.
(3) Abnormal jump or necessary shutdown is the potential pressure of production pause. In order to reduce the risk of production pause, it is necessary to consider setting up a spare machine. The spare machine using a single operation will be as high as 50%.
Laser cutting special air compressor manufacturers to do the public like the air compressor brand should not only focus on the price advantage, these problems need more attention.
Its advantage lies in five major advantages: integrated integration, oil-free and water-free, only material connection, adjustable pressure, and ready-to-use. It uses a one-piece integrated structure to make installation more convenient, and saves the trouble of self-equipped gas storage tank, cold dryer and filter;
save the trouble of taking over the installation, and use it when receiving electricity; Save the trouble of requiring multiple supplier services.
Greatly reduce the user's workflow, increase the efficiency of the work. Intelligent housekeeper remote monitoring, 24-hour online detection, no need for special management, open the phone can quickly get machine operation information.
when the equipment encounters failure or needs maintenance, the system will automatically send warning information.
The working principle of the special air compressor for the laser cutting machine: the high temperature and high humidity compressed air from the compressor is first exchanged with the dry low-temperature air in the heat exchanger to cool down, and then enters the evaporator for further cooling. Most of the gaseous water molecules in the evaporator are condensed into Liquid water is discharged.
Thereafter, the compressed air with a very low water content enters the adsorption drum for further drying and dehumidification to obtain a product gas with a lower dew point. Finally, the low-temperature dry air enters the heat exchanger to cool the high-temperature and high-humidity intake air, and its temperature also rises to prevent condensation outside the conveying pipeline.
We all know that compared with ordinary air compressors, oil-free air compressors have stronger air cleaning capabilities. With the needs of industry production, many factories are now using oil-free air compressors to replace traditional air compressor equipment. Oil-free air compressor brand manufacturers on the market are also
When we choose an oil-free water-lubricated air compressor, in addition to conventional parameters such as displacement and power, we generally pay attention to its cooling method. Generally, there are two main cooling methods for an oil-free water-lubricated air compressor: water-cooled and Air-cooled, then these two cooling methods
1, small maintenance: only need to replace the air compressor oil and oil filter, usually in the new machine running 500 hours to replace. 2. Major maintenance: In addition to replacing the air compressor oil and oil filter, it is also necessary to replace the air compressor air filter element, oil and gas separator core, motor grease, etc.
Can the compressed air of the water-lubricated air compressor be used directly without treatment? The exact answer is no. The air compressed by the air compressor is cooled by the rear cooler. After the air-water separator is separated and the buffer tank is stabilized, it is generally in a saturated state. Its relative humidity is 100, and there will be impurities such as solid particles. This compressed air cannot be used directly and needs to be dried and purified.
In the hospital environment, air compressors (referred to as air compressors), as important auxiliary equipment, provide stable and clean compressed air for various medical scenarios, and are the key infrastructure to ensure the smooth progress of medical activities. The following are the main application areas of air compressors in hospitals
Air compressor is one of the general equipment in the manufacturing industry, and doing a good job of energy saving management of air compressor is a necessary work for enterprises to save electricity. In order to save the production cost of enterprises, enterprises equipped with high energy efficiency air compressor is imminent. So how to make the air compressor energy saving?
Buy a well-known water-lubricated air compressor, such as Shanghai Granklin Group, and a good quality oil-free air compressor will not be so easy to break. The oil-free air compressor has the advantages of low noise, high compressed air quality, stable performance, and convenient movement. In order to ensure its
Oil-free air compressor is divided according to whether the compressed air contains oil or not, corresponding to oil air compressor or micro oil air compressor. Oil-free air compressors are distinguished according to different compression forms or different host structures.
The gas supply pressure required by the glass industry is relatively small. If the conventional air compressor on the market is used, it will cause a waste of resources. The conventional pressure on the market is 0.7-1.0mpa, and the glass industry is 0.3-0.5mpa. This requires accurate selection during selection without wasting too much energy consumption. When your air pressure is 0.2 -- 0
A large amount of condensed water will be produced during the working process of the air compressor, which must be discharged in time in order not to affect the normal operation of the unit. There are two main ways of condensate discharge, manual discharge and automatic discharge. Manual discharge has a disadvantage. If the staff forgets to discharge, it will lead
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
