Glass production procurement air compressor

The gas supply pressure required by the glass industry is relatively small. If the conventional air compressor on the market is used, it will cause a waste of resources. The conventional pressure on the market is 0.7-1.0mpa, and the glass industry is 0.3-0.5mpa. This requires accurate selection during selection without wasting too much energy consumption.

When your air pressure is 0.2-0.5Mpa, choosing a conventional 0.7Mpa air compressor will cause huge waste of electricity. Choosing a medium and low pressure air compressor can greatly increase the air production of compressed air under the same motor power. Correspondingly, you can save electricity by 20-50%.

If you buy a 0.7Mpa machine and the actual use pressure is 0.3Mpa, its working process is usually as follows: the screw host first compresses the air to 0.7Mpa, and then reduces the pressure to 0.3Mpa through pressure reducing valves and other means.

In other words, you are using a pressure of 0.3Mpa and you are suffering from a power consumption of 0.7Mpa.