Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
In today's increasingly pursuit of energy saving and environmental protection era, the choice of air compressor has become the focus of the major industrial fields. For users who pursue high efficiency, energy saving and stable performance, the water-lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly the best in the market.
The moisture content in the air is not a fixed value, but is affected by many factors such as temperature, humidity, geographical location and climatic conditions. In the air at normal temperature and pressure, the moisture content may be between hundreds and thousands of ppm, depending on
The load running time of the air compressor does not have a fixed standard, it depends on a variety of factors, such as the type of air compressor, application, workload and maintenance conditions. Here are some general guidelines: Regular working hours: Pass
The pressure of the air compressor usually depends on its design and application requirements. In general, the pressure range of industrial air compressors is between 0.7 and 1.2 megapascals (MPa), which is equivalent to 7 to 12 bar (bar). This pressure range is usually sufficient for most industrial production.
The automatic drainage device of the air compressor is an important part of the air compressor system. Its main function is to automatically discharge the condensed water in the pipeline, the gas storage tank, the oil-water separator and the filter. The following is a detailed description of the air compressor automatic drainage device:
The air compressor will produce a large amount of moisture and sediment during operation. If the moisture is not discharged in time, it will cause damage to the equipment. The following is the method of discharging water from the air compressor: manual drainage method: turn off the power supply of the air compressor to ensure safety.
It is a common problem that the compressed air produced by the air compressor contains moisture, which may cause damage to the production line and pneumatic tools. Here are some ways to solve the moisture problem of the air compressor: Install the post filter:
At the outlet of the air compressor install an efficient
The pressure of compressed air depends on many factors, including the design, use and operating environment of the air compressor. The following is the general pressure range of air compressor compressed air according to different fields and applications: Industrial air pressure: common
The screw air compressor cannot supply air for the following reasons: The air intake filter is clogged: After long-term operation, the air intake filter may accumulate or be blocked, resulting in a decrease in air intake, which affects the air supply of the air compressor. ability. Regular cleaning or replacement of the filter is the solution to this
There are many possible reasons for the low voltage shutdown of the air compressor. The following are some common troubleshooting points and solutions: poor contact of the power cord: the power cord may be open or loose, resulting in unstable voltage. Should be checked and re-fixed
