Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Air storage tanks are pressure vessels in special equipment, and their specific classification depends on the design pressure and volume. According to China's Special Equipment Safety Law and other relevant regulations, pressure vessels are generally divided into category I and II. A class of pressure vessels: usually referred
The design service life of the air storage tank pressure vessel is mainly affected by a number of factors, the following is a detailed summary and analysis of these factors: design life and standards: the air storage tank in the design stage will be based on the design standards and specifications to determine a set.
Equipment with a pressure of 0.1MPa is generally not considered special equipment. According to relevant regulations and standards, special equipment usually refers to equipment that involves life safety and is more dangerous, such as pressure vessels, boilers, elevators, etc. For pressure vessels, in general, when working
The life of the screw air compressor is affected by many factors, including the use environment, maintenance, operation mode, etc. Generally speaking, the service life of the screw air compressor can reach 5 to 15 years, but the specific life needs to be judged according to the actual situation. First
Oil-free compressors mainly use the following lubrication methods: Air lubrication: This method reduces the friction between machine parts by increasing the water molecules in the air. During operation, the oil-free compressor will produce water molecules in the compression chamber, and then benefit
The annual consumption of compressed air in a chemical plant varies depending on many factors, including the size of the chemical plant, production processes, equipment conditions, and production needs. Therefore, it is not possible to give a specific figure to represent the annual consumption of compressed air for all chemical plants. However, we
On the site, multiple units or types of work may use air compressors, depending on the specific needs of the site and the type of work. Generally speaking, the following units or types of work may use air compressor: construction unit: construction unit is carrying out concrete spraying
The conversion between the air consumption of the equipment and the power of the air compressor is not directly obtained by a simple formula, but needs to consider multiple parameters, including the exhaust pressure and exhaust temperature of the air compressor. However, I can provide some relevant formulas and information to help you understand
In terms of humidity control, it is generally recommended that the ambient humidity should not exceed 50%. This is because excessive humidity may cause equipment damage, especially in high humidity environments, water vapor in the air may enter the air system of the air compressor
Air compressor jet with water is a relatively common problem, which can usually be solved by the following methods: check and replace the drain valve: the automatic drain of the air compressor or the automatic drain of the air storage tank may be blocked, resulting in the original should be discharged
