Focused on compressed air system design, air treatment, piping configuration, equipment maintenance, and common industrial air issues, with practical guidance based on pressure, flow, dew point, air quality, and operating conditions for equipment selection, system optimization, and routine operation and maintenance.
Whether the air compressor needs to be explosion-proof depends on its use environment, gas medium and potential risk factors. If the air compressor is operated in the presence of flammable and explosive gases, dust or high-risk environment, it must adopt explosion-proof design; if used in ordinary safety environment
In the calculation of the gas consumption of the instrument and the selection of the air compressor, the continuous gas consumption is a key parameter, which directly reflects the continuous demand for compressed air under the stable operation state of the instrument. The following is a detailed explanation of continuous gas consumption: 1. the definition of continuous gas consumption.
The pressure of the plant's gas source is lower at night than during the day, which may be caused by various reasons such as environmental temperature change, equipment operation status, pipeline system problems, user demand change or external factors interference. The following is a specific analysis: 1. the influence of environmental temperature change The temperature difference between day and night
To select a suitable air compressor for the workshop equipment, it is necessary to scientifically calculate the total air consumption and consider the actual working conditions. The following are the specific steps and key points: 1. calculate the total air consumption of the workshop equipment 1. Statistical equipment list List all gas-consuming equipment (such as pneumatic tools, spray guns, cylinders
Oil-free air compressors do not require any form of lubrication at all, but achieve an "oil-free" state during compression through special designs or alternatives. The following is a detailed explanation: the core principle of 1. oil-free lubrication air compressor
In the cleaning process of the electronic industry, compressed air must meet the core standards of ultra-low oil content (≤ 0.003 mg/m & sup3;), extremely low particle pollution (particle size ≥ 0.1μm particle number <1000/m & sup3;), deep drying (pressure dew point ≤-70 ℃ or even -100 ℃)
In the non-ferrous metal industry, air compressors are mainly used in scenarios such as power execution, instrument gas and spraying. The demand characteristics are reflected in the differentiated requirements for pressure, quality and post-processing equipment, as follows: 1. application scenarios Power execution smelting link: in non-ferrous gold
In the non-ferrous metal industry, air compressors are mainly used in scenarios such as power execution, instrument gas and spraying. The demand characteristics are reflected in the differentiated requirements for pressure, quality and post-processing equipment, as follows: 1. application scenarios Power execution smelting link: in non-ferrous gold
Plant supply pressures are typically between 0.5 MPa and 0.8 MPa, with values varying by industry, equipment type and process requirements. The following is a detailed description: 1. the typical air supply pressure range of different industries, pneumatic tools for machinery manufacturing industry: light
PPM is the abbreviation of "parts per million" (parts per Million), which means that the proportion of a substance in the total amount is one part per million, that is, the target substance contained in each million parts of the mixture. This unit is in the fields of science, engineering, medicine, etc.
