2026-04-09Views：
When the air compressor output with water, usually refers to the compressed air contains too much moisture, which may affect the use effect and may cause equipment damage. For the water-lubricated oil-free frequency conversion screw air compressor of Shanghai Granklin Group, although it uses water as the lubricating medium, the compressed air output should be dry under normal circumstances. In case of air-carried water, the following measures can be taken:
check the drainage system: ensure that the drainage system of the air compressor works normally. Check whether the drainage valve is open and whether the drainage pipe is unblocked, so as to drain the condensed water in time.
Adjust the pressure dew point: pressure dew point refers to the compressed air under a certain pressure began to precipitate water temperature. By adjusting the operating parameters of the air compressor, such as reducing the output temperature of the compressed air or increasing the pressure, the pressure dew point can be changed, thereby reducing the moisture content.
Install drying equipment: Install drying equipment at the output of the air compressor, such as a freeze dryer or an adsorption dryer, which can further remove the moisture in the compressed air and ensure that the output gas is dry.
Check the water quality: for water lubricated oil-free screw air compressor, the quality of water directly affects the quality of compressed air. Regularly check and replace the water source to ensure that the water quality meets the requirements, which can reduce the damage of impurities and microorganisms in the water to the internal components of the air compressor, thereby reducing the possibility of air carrying water.
Check the airtightness of the air compressor: ensure that the air compressor has a good airtightness and prevent external moisture from entering the air compressor. Check whether the connection parts are tight, whether the seal is aging or damaged, and replace it in time.
If the problem of air-carrying water still cannot be solved after taking the above measures, it is recommended to contact the technical support team of Shanghai Grankering Group or professional maintenance personnel for inspection and maintenance. They can conduct a comprehensive inspection of the air compressor, determine the problem, and provide corresponding solutions.
It should be noted that when dealing with the problem of gas and water, the operation safety should be ensured to avoid equipment damage or personal injury due to improper operation. If you are not sure how to deal with or cannot solve the problem, please consult a professional in time.
In dairy production, compressed air is widely used in many key links, as follows: 1. raw material handling and conveying Milk pump drive: In the milk collection stage, compressed air is used to drive the milk pump to quickly and safely extract fresh milk from the cow to the milk storage
What are the possible reasons for the abnormal noise of the screw air compressor? The screw air compressor usually emits a stable sound during normal operation. However, if it starts to rattle, it could be for a number of reasons. The following are some of the differences that may cause the screw air compressor to emit
Whether the air compressor needs to work 24 hours depends on the specific application requirements and working scenarios. Some application scenarios require a continuous supply of compressed air, which requires the air compressor to run 24 hours a day. For example, some production lines, processes or medical
The replacement cycle of the air compressor filter element needs to be comprehensively determined according to the three elements of operating conditions, environmental cleanliness, and filter element quality. The following are specific guidelines: 1. routine replacement cycle Use scenarios Air filter element Oil filter Oil separator
Oil-free screw air compressor technology analysis Oil-free screw air compressor is a kind of equipment that adopts oil-free lubrication technology and realizes air compression through the meshing motion of screw and star wheel. Its core lies in the physical structure design and water lubrication system to replace the traditional lubrication.
The air pressure used by the air compressor is not as high as possible. The appropriate air pressure should be selected according to actual needs. The core principle is "constant pressure on demand" to reduce the air supply pressure as much as possible on the premise of meeting production needs. The specific analysis is as follows: 1. the disadvantages of high pressure
The air compressor belongs to the general mechanical type. The air compressor (English: air compressor) is the main body of the air source device. It is a device that converts the mechanical energy of the prime mover (usually an electric motor) into gas pressure energy.
The moisture content in atmospheric air is usually expressed in terms of "relative humidity", that is, the amount of water vapor actually contained in the air as a percentage of the maximum water capacity of the air at that temperature. For example, a relative humidity of 60% means that the current amount of water vapor in the air is the same temperature.
In the compressed air system, the pipeline is the key component of gas transmission, and its pressure resistance level should be scientifically matched with the working pressure of the air compressor to ensure the safe and stable operation of the system. Granklin water lubricated screw air compressor rated pressure
Wafers have strict requirements for compressed air, because any tiny oil, moisture or solid particles can have a significant impact on the wafer production process, reduce product quality, and even cause equipment damage. The following are some of the main fabs for compressed air
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
