2026-04-10Views：
The national standard of vibration value of compressor is mainly based on the technical specification of compressor vibration. For different types of compressors, such as reciprocating, centrifugal, screw, etc., the vibration value standard may be different. Generally speaking, the vibration value of the compressor should meet the following standards:
transverse vibration value: not more than 2.5 mm/s.
Longitudinal vibration value: not more than 1.5 mm/s.
Axial vibration value: not more than 1.5 mm/s.
These standards apply to vibration measurements under normal operating conditions and may vary depending on factors such as air pressure, temperature, humidity, and the quality of the vibration sensor. For more complex systems, such as multi-stage compressors, the standard may need to be higher.
For specific air compressors or compressors, it is best to operate and maintain according to the guidelines provided by the manufacturer and follow the specified vibration value range. If the vibration value exceeds the standard range, inspection and maintenance should be carried out in time to avoid equipment damage or affect production efficiency.
Please note that the above information is for reference only, and the specific vibration value standard may vary according to different countries, regions or industry standards. In practical applications, the specific vibration value requirements should be determined with reference to relevant national or industry standards.
In the field of biopharmaceuticals, compressed air is the core element to ensure drug quality and production safety. Its application runs through key links such as fermentation, packaging, transportation, automatic control and experimental research, and has extremely high requirements for air quality. The following from the application scenario and quality
The amount of air that can be stored in the air compressor tank mainly depends on its volume, working pressure and the compressibility of the gas. The following is a detailed analysis of the amount of air stored in the air compressor tank: 1. the relationship between the volume of the air tank and the amount of stored air The volume of the air tank is the decision
In the bottle blowing industry, as one of the core equipment, the choice of air compressor is very important for product quality and production efficiency. In the face of oil-free air compressors and oil-free air compressors, bottle blowing factories often need to weigh the pros and cons and make the most suitable decision for their own needs. from blowing bottle
Oil-free screw air compressor standards mainly include national standards, industry standards, design requirements, performance parameter requirements, energy saving and environmental protection requirements, and safety and reliability requirements. The following is a detailed analysis of these standards: 1. national standard GB
There are indeed types of air compressors that do not require oil, which are mainly oil-free air compressors. The following is a detailed explanation of the oil-free air compressor: Working principle: The oil-free air compressor uses compressed air to directly complete the gas and liquid state in the cylinder
If the pursuit of high efficiency and energy saving, pure compressed air and intelligent management, the use of Shanghai Granklin Group water lubrication technology of permanent magnet variable frequency air compressor is a better choice.
Whether the dust air compressor needs explosion-proof depends on the specific use environment and the nature of the dust. Generally speaking, if there is combustible dust in the environment where the air compressor is located, and the dust concentration may reach the explosion limit, then the dust air compressor needs to be explosion-proof.
The comparison of oil-free and oil-free screw compressors can be carried out from the following aspects: 1. lubrication method Oil-free screw compressor: Lubricating oil is needed to lubricate the screw and sliding bearings during the compression process. After the lubricating oil is filtered and cooled
Compressed air for food does have clear quality standards. These standards are designed to ensure the purity and quality of compressed air to meet the hygiene and safety requirements of food processing and production. The following are several key aspects of compressed air quality standards for food: 1. International
The maximum pressure resistance value of the factory air source pressure gauge varies depending on the application scenario, medium type and industry specifications. The following is a specific analysis: 1. common pressure resistance range compressed air system: general standard: the maximum pressure resistance of the compressed air pressure gauge in the factory is usually
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
