2026-04-15Views：
Analysis of Compressed Air Quality Standard in Clean Workshop and Adaptability of Granklin Air Compressor
as a production site with high environmental cleanliness requirements (such as electronic component manufacturing, pharmaceutical production, precision instrument assembly, etc.), the compressed air quality must meet strict standards to avoid impurities contaminating products or damaging equipment. The following are the core quality requirements for compressed air in clean workshops and how granklin air compressors meet these standards through technological innovation.
particulate matter control
the content of small particles (such as dust and metal debris) in compressed air should be strictly controlled. Particulate matter may adhere to the surface of the product, causing short circuit of electronic components, contamination of pharmaceutical preparations or wear of precision parts.
Zero tolerance of oil
even a very small amount of oil (such as traditional lubricating oil volatiles) may form an oil film in a clean environment, contaminating high-precision products or blocking valves of pneumatic equipment, affecting production stability.
Moisture and Humidity Management
the moisture in the compressed air should be kept at a very low level to avoid corrosion of metal parts, moisture in electronic circuits or deformation of packaging materials due to condensation.
granklin water lubricated single screw air compressor through innovative design, from the source to solve the problem of compressed air pollution, perfect fit the quality requirements of clean workshop:
oil-free operation to eliminate oil pollution
water film lubrication is used instead of traditional oil lubrication to completely avoid oil mixing into compressed air. Water as a natural lubricating medium, no volatile, no residue, to ensure that the output air "zero oil", to meet the strict limits of the clean workshop on oil.
Precision filtration reduces the risk of particulate matter
the meshing structure of the single screw and the star wheel reduces mechanical friction and reduces the generation of metal particles from the source. At the same time, the equipment can be equipped with high-efficiency filters to further intercept the dust introduced from the outside and ensure that the concentration of particulate matter meets the standard of clean workshop.
Water circulation cooling to control moisture and temperature
the water lubrication technology has the cooling function, effectively controls the temperature of the compression chamber through the circulating water system, reduces the moisture saturation in the air, and reduces the risk of condensed water generation. A stable airflow temperature also helps maintain the humidity balance of the workshop environment.
the compressed air quality in the clean workshop directly affects the product qualification rate and enterprise compliance qualification. Granklin air compressor provides reliable support for the following scenarios with oil-free, low particle and water control characteristics:
through technological innovation, granklin air compressor improves the quality of compressed air to the high standard required for clean workshops, helping enterprises to achieve pollution-free, high stability and compliance in the production process. With pure air to protect product quality and reliable technology to enable efficient production, Granklin air compressor is an ideal compressed air solution for clean workshops.
During the operation of the air compressor, due to the impurities, moisture and other components in the air, it is easy to enter the air compressor oil, coupled with the catalytic effect of oxygen, moisture, and metal under high temperature and high pressure conditions, the air compressor oil will undergo oxidation reactions, resulting in oil Deterioration, and then various deposits
Oil-free scroll compressors can indeed be used for gas transfer. The oil-free scroll compressor is a kind of positive displacement compressor. Its working principle is to compress through two intermeshing scrolls (a fixed scroll and an eccentric swirling and flat scroll).
During the operation of the air compressor, the temperature of the air is increased due to the compression of the air, and the water vapor content in the air increases. When compressed air is cooled, water vapor condenses into liquid water, which is the main source of moisture in compressed air. If you do not deal with this moisture in a timely manner
When the air compressor shows the "host imbalance" fault, it usually refers to the core component of the air compressor-the compressor host is in an unbalanced state during operation. This failure can be caused by a variety of reasons, including but not
There are many ways to remove water from air compressors. The following are some common and effective methods: Manual drainage: In some simple air compressors, preliminary water removal operations can be carried out manually at the exhaust port. The specific method is to compress the air
Medical air compressor is to provide clean compressed air to the hospital equipment, and water lubricated air compressor because of water instead of oil, so that the output of the air is more pure and safe, especially suitable for use in the air quality requirements of the high medical environment, guarding the health of every patient.
The ratio of the electric energy consumed by the air compressor into compressed air is not a fixed value, but is affected by many factors, including the design of the air compressor, the quality of manufacture, the operating state and the efficiency of the use of compressed air. Generally speaking, the electric energy of the air compressor is converted into pressure
Comparative Analysis of Permanent Magnet Variable Frequency Air Compressor and Granklin Water Lubricated Single Screw Air Compressor In the field of industrial compressed air equipment, permanent magnet variable frequency air compressor and Granklin water lubricated single screw air compressor occupy an important position with their unique technical advantages. The following from the original work
Excessive moisture in the air compressor will affect the quality of compressed air, resulting in equipment failure or production problems. The following are the reasons for excessive moisture and systematic solutions: 1. to the core reasons, when the air humidity is too high and the ambient humidity is more than 70%, the moisture in the compressed air is easy to be saturated.
The pressure of the plant gas supply usually depends on the specific application needs and equipment specifications. Generally speaking, the air source pressure for industrial use is usually between 0.6MPa and 1.0MPa, which is a relatively general range and is suitable for most pneumatic tools, automation equipment and other
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
