2026-04-09Views：
Common terms related to air compressors include:
nominal volume flow: refers to the gas volume discharged by the air compressor per unit time under a certain exhaust pressure.
Pressure: refers to the highest pressure of the air compressor discharge gas, the commonly used working pressure unit is bar or Mpa.
Gas oil content: unit volume of compressed air contained in the oil, including oil droplets, suspended particles, oil vapor quality.
Pressure dew point: refers to the gas with a certain pressure is cooled to a certain temperature, and the unsaturated water vapor contained in it becomes saturated water vapor. This temperature is the pressure dew point of the gas.
For water-lubricated air compressors, common terms are:
water lubrication: Use water instead of traditional lubricating oil for lubrication and cooling.
Oil-free compression: A characteristic of water-lubricated air compressors, that is, no lubricating oil in any form is used during the compression process, thereby avoiding the impact of oil-gas mixture on air quality.
High-efficiency heat dissipation design: refers to the high-efficiency heat dissipation structure and technology adopted by the water-lubricated air compressor, which can quickly dissipate the heat generated by the compressor and maintain a stable operating temperature.
Water quality treatment: refers to the water used in the water-lubricated air compressor for filtration, softening and other treatment to ensure the purity and stability of water quality.
Environmental protection discharge: refers to the water lubricated air compressor discharge wastewater can be recycled after treatment, no pollution to the environment characteristics.
The above terms are for reference only. If you need to know more about the terms related to the air compressor, it is recommended to consult a professional engineer or air compressor supplier.
In the process of food processing, the gas exposed to the product needs to meet a series of requirements to ensure the safety and quality of the food. The following are some of the main gas requirements: Purity requirements: The gas should be of high purity to avoid the introduction of impurities or contaminants. especially
Air compressors are widely used in factories, covering almost all aspects of factory production and operation. The following is a detailed summary of the main application areas of air compressors in the factory: 1. Power supply pneumatic tools and equipment: air compressors are pneumatic drills and pneumatic screwdrivers
Air compressor three filter mainly includes: air filter, oil filter, oil separator. The method of replacing each filter element is slightly different, and we will talk about it separately. Replacement of 1. air filter Screw air compressor sucking air
The working process of the air compressor can be summarized into the following main steps: Start-up phase: The air compressor usually uses the motor start-up method, that is, the motor is started by the motor starter, and then the compressor is driven to work. Air suction and filtration: when the air compressor starts
During the use of the air compressor, in order to ensure the safety of personnel and the normal operation of the equipment, the following safety precautions must be strictly observed: Professional operation and training: The air compressor should be used by professionally trained and qualified operators. Before operation, ensure that the operator
Answer: Oil-free air compressor is used in various industries, in the medical, food, special gas, semiconductor and other industries are widely used. Shanghai Granklin (Group) Co., Ltd. is located in Baoshan District, Shanghai
The management and operation of air compressors need to pay attention to the following aspects to ensure the normal operation and production safety of air compressors: 1. operators to manage professional training and certificates: air compressor operators must undergo professional training and obtain corresponding operation qualifications
The air compressor needs to be maintained for the first time after 500 hours of operation (first maintenance), mainly to remove impurities generated during the running-in period of the equipment, ensure stable lubricating oil performance, and extend the service life of the equipment. The following is the specific reason analysis: 1. remove the running-in period impurity metal micro
The blowdown operation of the air compressor blowdown valve is relatively simple, but it needs to follow certain steps and precautions. The following are the basic steps for sewage discharge: Preparation: Make sure that the air compressor has stopped running and disconnect the power supply to ensure safe operation. Get ready.
Both oil-free scroll air compressor and oil-free screw air compressor belong to the air compressor of oil-free lubrication technology, and there are significant differences in the core principle, performance characteristics and application scenarios. The following from the working principle, performance comparison, application scenarios, selection recommendations four
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
