2026-04-09Views：
Q: micro oil screw air compressor export oil content?
Answer: The oil content at the outlet of the micro-oil screw air compressor is usually not higher than 5ppm. This standard is the value measured under standard conditions. Different manufacturers design different separation methods and materials, will affect the amount of oil content. When using a micro-oil screw air compressor, if the oil content is too high, it may cause blockage and corrosion to the gas pipeline, and also cause pollution to the industrial products. Therefore, it is necessary to control the oil content of the micro-oil screw air compressor.
The "water lubricated air compressor" of Shanghai granklin group is inherently oil-free in compressed gas. granklin group also has complete air compressor qualification and can be used in many industries.
The relationship between the power and flow of the air compressor is simply the relationship of "great strength and more work. Power is like the "physical strength" of the compressor. The greater the power, the more "strength" the compressor can provide. And flow
The comparison of the efficiency of oil-free air compressors and oil-free air compressors is not a simple "yes" or "no" question. They have their own advantages and are suitable for different scenarios and needs. Oil-free air compressor, just like a elegant
In the semiconductor industry, nitrogen plays a crucial role, especially in high-purity gas supply. The following is the semiconductor industry nitrogen related standards, terminology and its "soft" (I. e. non-technical, easy to understand) explanation
The cubic number of the air compressor, also known as the displacement or volume flow, represents the volume of air compressed by the air compressor per unit time. It is usually expressed in cubic meters per minute (m & sup3;/min) or cubic feet per minute (CFM). This number is a measure of air compressor
The maintenance cycle of the screw machine can be determined according to a number of factors, including the use environment of the equipment, the frequency of use, the condition of the equipment, etc. Generally speaking, the maintenance of the screw machine can be divided into daily maintenance and large maintenance. Daily maintenance: the recommended cycle is 1~2 months
The durability of oil-free air compressors is a relatively complex issue, which is affected by many factors, including equipment quality, operating environment, workload and maintenance. The following is a detailed analysis of the durability of oil-free air compressors: durability advantage internal
The air compressor power corresponding to the 37kw motor is 37kw. However, to convert it to horsepower (HP), the following calculation can be referred to: 1 horsepower (HP) is approximately equal to 0.75 kW (KW). Therefore, the 37 kW (KW) of the air compressor corresponding to the horsepower (HP) can pass 3
Whether the mobile air compressor is a special equipment depends on its specific parameters and uses. Generally speaking, the air compressor is a general-purpose mechanical equipment, and only when its gas tank (pressure vessel) meets the conditions of special equipment, it needs to be managed according to the special equipment.
Air compressor plays a vital role in the petrochemical industry, and its role runs through the whole production process. It is the core equipment to ensure process safety, improve product quality and achieve energy saving and consumption reduction. The following from the process support, equipment security, safety and environmental protection, energy.
Water lubrication and dry oil-free methods have their own advantages and applicable scenarios, so it is impossible to generalize which is better. The following is a comparison between the two: Advantages of water lubrication: High purity Output: Water-lubricated air compressors use water as a lubricant, which can remove the compression process
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
