How long is the screw machine maintenance cycle?

The maintenance cycle of the screw machine can be determined according to a number of factors, including the use environment of the equipment, the frequency of use, the condition of the equipment, etc. Generally speaking, the maintenance of the screw machine can be divided into daily maintenance and large maintenance.

Daily maintenance: the recommended period is 1~2 months. This is mainly the daily maintenance and cleaning work of the equipment.

Major maintenance: the recommended cycle is 6~12 months. This maintenance requires a thorough inspection and maintenance of the equipment, including but not limited to replacing the air compressor oil, oil filter, air filter element, checking the cooling system, and the condition of cables and connectors.

In addition, for specific parts in the screw machine, such as air compressor oil and oil filter, the oil core should be replaced after the first 500 hours of operation of the new machine, and then it can be replaced every 2000 hours of operation. For major maintenance, it is generally recommended to run the machine for about 3000 hours, but if the working environment is poor, such as a lot of dust, this time should be shortened appropriately.

In general, the maintenance cycle of the screw machine is not fixed, but needs to be adjusted according to the actual situation. In order to ensure the effectiveness of maintenance, it is best to operate by professional maintenance personnel.