Granklin Air Compressor Advertising Copy - Welcome to Join and Order

Winter water lubrication air compressor use method and matters needing attention

2026-04-09Views:

Winter air compressor must pay attention to water (water lubricated air compressor), do not turn on immediately when the weather is cold, first use the heater to heat the machine.

The water in the head of the water-lubricated air compressor has not completely frozen. It needs to be heated for a while before starting up.

Other key points:

1. Add a net cover at the air compressor room and air inlet of the air compressor.

2. Regularly purge the air inlet of the air compressor, filter cotton, cooler and cooling fan cover of the motor.

3. Regularly observe the operating temperature of the air compressor. In case of high temperature, check the unit in time.

4. If you have any questions, contact our service provider in time to avoid long-term "sick" work of the air compressor.

More Recommendations

  • 2026-04-10

    How to drain the air tank of the air compressor

    Air compressor storage tank drainage steps are as follows: before the boot or shutdown, to ensure that the condensate is fully precipitated, so that it will not affect the normal use of the unit at the same time to ensure the effect of drainage. Drainage in the air compressor shutdown, oil and gas separation tank without pressure,

    View details
  • 2026-04-10

    Is the screw air compressor a pressure vessel?

    Screw air compressor is a kind of air compressor, mainly used to provide compressed air. The pressure vessel is a closed device that can hold gas or liquid and carry a certain pressure. Although the screw air compressor will produce a certain pressure in the work, but its own

    View details
  • 2026-04-10

    Industrial compression that air storage tank service life

    The service life of industrial compressed air storage tanks is affected by many factors, including the material, manufacturing process, use environment, use status and maintenance of the storage tank. According to the relevant national standards, the service life of compressed air storage tanks can generally be

    View details
  • 2026-04-10

    Can I turn on the air compressor first and then the freeze dryer?

    Yes, it is theoretically possible to turn on the air compressor first and then the freeze dryer, but it is not the best operation sequence. In actual operation, although the air compressor provides the compressed air required by the freeze dryer, in order to ensure the normal operation of the equipment and the quality of the compressed air, it is more recommended.

    View details
  • 2026-04-09

    Oil air compressor is the most durable or oil-free and durable

    The durability of oil-free air compressors and oil-free air compressors cannot be generalized, because their durability depends on many factors, including design, manufacturing process, material selection, use environment and maintenance. Oil air compressor usually uses lubricating oil

    View details
  • 2026-04-10

    What is the general air pressure of the factory air compressor?

    The size of the air pressure of the factory air compressor is generally determined according to the specific application scenario and demand. Usually, the air pressure range of the factory air compressor is between 0.6 and 1.0MPa, and it is also said that the working pressure of the industrial air compressor is generally around 7 to 10bar. The following are some

    View details
  • 2026-04-15

    What is the hospital air compressor?

    As an important equipment of medical system, the core value of hospital air compressor is to provide clean, stable and reliable air source for all kinds of medical equipment, which runs through many links such as diagnosis, treatment and first aid. The following three dimensions: function, application scenario and technical characteristics

    View details
  • 2026-04-09

    How often does the air compressor filter element change

    Generally good air compressor air filter can be used for 1500-2000 hours and must be replaced after expiration. However, if your air compressor room environment is dirty, a better air compressor filter element will be replaced in 4 to 6 months. If the air compressor air filter

    View details
  • 2026-04-14

    How much air pressure is appropriate for the processing center

    The air pressure requirements of the machining center usually vary according to the specific model and process requirements. However, in general, the air pressure of the processing center can be maintained in the following range: Common air pressure range: The air pressure requirements of most processing centers are usually maintained between 0.4 and 0.6MPa

    View details
  • 2026-04-15

    Can two air compressors supply air to one pipeline?

    Two air compressors can supply air to the same pipeline, but they need to be reasonably configured according to the equipment type, control mode and pipeline design to ensure stable and efficient operation of the system. The following is the specific analysis: 1. feasibility analysis basic conditions pressure matching: two

    View details