2026-04-09Views：
Q: What are the compressed air regulatory standards for the food industry?
Answer: ISO international standard: ISO 8573-1:2010.
Reference content: launched by the [National Standard Project-National Standard Information Public Service Platform]
compressed air-Part 1: Levels of purification of pollutants
https://std.samr.gov.cn/gb/search/gbDetailed?id=99DDBA0926F3DDE3E05397BE0A0A9E78 std.samr.gov.cn
if there is any incorrect place, please contact us for revision.
The difference between the power consumption of the inverter compressor and the power frequency compressor varies with the operating conditions. Under low load or fluctuating conditions, the inverter compressor can save 10%-50% of the power; under full load conditions, The power consumption of the two is close, and the inverter compressor may have a slightly higher loss due to the inverter. to
Power plants have strict requirements on the oil content of compressed air, usually requiring an oil content of no more than 0.1 mg/m & sup3;(ISO 8573-1 Level 2) or lower, and some key systems even require ≤ 0.01 mg/m & sup3;(Level 1). Specific requirements due to system use and industry standards
The replacement cycle of the air filter element of an air compressor depends on a number of factors, including the use environment of the air compressor, the working load, the air quality and the quality of the filter element. Typically, the replacement cycle of the filter element can vary from weeks to months. in a harsh working environment
When choosing an air compressor, gas consumption is a very important consideration. The following are some professional suggestions to guide you to choose the air compressor according to the air consumption, and try to use soft and professional terms to explain: determine the air consumption: first
The air from the air compressor contains a lot of water, which may be caused by a variety of reasons. In order to solve this problem, the following measures can be taken: 1. check and maintain the drainage system to discharge condensate regularly: install a drain valve at the bottom of the air tank of the air compressor,
The replacement cycle of air compressor oil varies due to factors such as the type of oil used, the environment in which the air compressor is used, and the operating time. The following are general guidelines: Determine the replacement cycle according to the oil type Mineral oil: Replacement cycle: It is recommended to replace one every 3 to 4 months
In the supporting equipment of the blow molding machine, the air compressor is an indispensable part, and the choice of its pressure is directly related to the blowing efficiency and product quality. For the bottle blowing air compressor, the choice of pressure should be determined according to the specific application scenario and the requirements of the bottle blowing machine. General
As an efficient and environmentally friendly compression equipment, water-lubricated air compressor has many well-known brands in the market. The following is one of some major water-lubricated air compressor brands: Shanghai Granklin Group Water-lubricated Air Compressor Shanghai Granklin Group is a domestic water-lubricated air compressor.
In laser applications, in order to ensure cutting quality and equipment safety, the oil content of the air compressor needs to be controlled at a very low level, usually requiring an oil content of less than 0.001ppm, and some high-precision scenes even require no oil. The following is a detailed description of this requirement: during laser cutting
The unit of equipment gas consumption can vary depending on the application scenario and the type of equipment. For example, in industrial production or gas transportation, common units include cubic meters (m & sup3;), standard cubic meters (Nm & sup3;), **liters (L)**, etc. These single
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
