2026-05-25Views：
simple answer: Yes, but not if you want to use it. You have passed the "physical examination.
The gas storage tank is a special equipment, and the 10-year warranty given by the manufacturer is actually the "recommended service life", which does not mean that it will be automatically scrapped in the 10th year and 1st day. For example, just like the recommended maintenance mileage of a car, it does not mean that the engine will break down immediately. The key is to look at the actual state.
What really decides whether it can continue to be used is the inspection results of the local quality supervision department. If you pass the inspection, you can continue to work. If the inspection fails, even if it has only been used for 8 years, it must be stopped and replaced.
after the expiration of the gas tank, you need to take the factory quality certificate and go to the local quality supervision bureau for inspection. Inspection items mainly include:
whether the tank body is thinned, whether the weld seam is cracked, whether the sealing ring is aging, and whether the safety valve and pressure gauge are still working. For gas storage tanks that are more than 5 years old, a hydraulic test must be done, that is, water is pumped into the tank to pressurize it to see if the tank can withstand it.
If you pass every inspection, it can be extended to a maximum of 15 years. But if you don't pass the test once, I'm sorry, you must replace it with a new can.
if the volume of your gas tank is less than 1 cubic meter, the working pressure is less than 10 kilograms, and the nameplate is marked with the words "simple pressure vessel", it will be exempted from inspection within 7 years and you do not need to register with the Quality Supervision Bureau. However, after the number of years has reached, it is still necessary to apply for inspection, and it is not up to you to decide.
no matter whether the warranty expires or not, the service life of the gas storage tank that is normally maintained in place will be significantly longer. There are a few things to do every day:
drain at least once a day. After the air compressor works, a large amount of water vapor will be generated, which will not be discharged at the bottom of the tank. Over time, the tank will rust from the inside, which is the biggest enemy of the gas storage tank.
Always take a look at the pressure gauge and safety valve. The pressure gauge is reset to zero normally and the safety valve can jump up, indicating that these two life-saving things are still working. If it fails, it must be replaced immediately.
Every month to see if the tank rust spots, bumps, deformation. Gas storage tanks in coastal areas or chemical environments corrode faster and should be inspected frequently.
if you use a water-lubricated air compressor, the life of the gas tank will be much better.
The water-lubricated air compressor uses water instead of oil in the compression process, and there is no oil in the air discharged and no carbon deposits will be produced. Ordinary oil air compressor for a long time, oil and gas will form carbon deposits on the pipeline and tank wall in the tank. More carbon deposits will not only affect heat exchange, but also have the risk of spontaneous combustion in serious cases. The air from the water lubricated air compressor is clean, there will be no sludge and carbon accumulation in the tank, and the inside of the tank is always relatively fresh.
Moreover, the temperature of the compression process of the water-lubricated air compressor is controlled more smoothly, the gas entering the gas storage tank will not be hot and cold, the tank body will bear less thermal expansion and contraction pressure, and the aging speed of the weld and sealing ring will also be slower. some.
In addition, the gas discharged from the water-lubricated air compressor contains less water. With the normal drainage every day, the problem of water accumulation in the gas storage tank will be much lighter, and it is less likely to corrode from inside to outside.
Therefore, it is also due in 10 years. The air storage tank equipped with a water-lubricated air compressor often has a higher probability of passing through when reporting for inspection, and the actual usable years may also be longer.
The expiration of the 10-year warranty is not the end point, but a "must go to physical examination" node. After the physical examination, I continued to use it, but the physical examination was replaced. At ordinary times, drain water, check the safety valve and look at the tank body. Coupled with a clean and oil-free air source such as a water-lubricated air compressor, the gas storage tank will be used for several years without any problem. But don't be lazy and don't report for inspection, that is the real security risk.
The advantages of power frequency screw air compressor are mainly reflected in the following aspects: high efficiency and stability: power frequency screw air compressor adopts high efficiency screw compressor, no need of lubricating oil inside, so the friction loss is small and the efficiency is high. This not only reduces operating costs, but also improves the ability
The problem of excessive moisture in the air compressor can be solved by the following steps: Reduce the ambient humidity: Since the humidity in the air is an important reason for the air compressor to produce moisture, reducing the ambient humidity in the machine room can effectively reduce the air The compressor produces
According to international standards and industry norms, the oil content of compressed air in contact with food shall be strictly controlled by grading. The specific standards are as follows: 1. direct contact with food scenes (such as ingredients, fermentation and stirring) International standard: ISO 8573-1:2010 Class 1: Oil content ≤ 0.0
In the field of medical equipment, the choice of medical air compressor is very important. It is not only related to the normal operation of medical equipment, but also directly affects the treatment effect of patients. So, among the many air compressor manufacturers, which is better? Shanghai Granklin Set
Scroll compressors and screw compressors have their own characteristics in terms of maintenance. The scroll compressor adopts new technology and its structure is relatively simple, so its maintenance cost is relatively low. In addition, the scroll compressor produces less noise during operation and has an impact on the production environment.
In a humid environment, the moisture problem generated by the air compressor will be significantly aggravated, which may lead to equipment corrosion, lubricating oil emulsification, and compressed air quality degradation, thereby affecting production efficiency and product quality. The following is a systematic solution, covering prevention, treatment and optimization measures
There may be many reasons for the large vibration of the screw compressor, including the following common situations: the anchor bolts of the unit are loose or the rigidity of the frame is poor. Poor alignment between compressor and prime mover. Unbalanced compressor rotor or worn bearing.
The frequency conversion and power frequency versions of screw air compressors have their own advantages, and the choice of which is better depends on the specific application requirements and usage scenarios. The advantage of the power frequency screw air compressor: the initial purchase cost is relatively low. Simple structure and convenient maintenance.
在制药发酵过程中，使用的压缩气体确实需要是无油的，这主要基于以下原因和行业要求：一、无油压缩气体的必要性 防止药品污染 制药发酵过程中，压缩空气直接接触菌种、培养基或药品
For traditional oil-lubricated air compressors, oil is a key component to ensure the normal operation of the compressor. It plays the role of lubrication, cooling and sealing. Therefore, in the regular maintenance cycle, the replacement of oil and oil filter is a common maintenance step. The oil will
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
