2026-04-09Views：
Q: How long is the air compressor maintenance cycle?
Answer: Air compressor maintenance time period is generally monthly, quarterly, semi-annual frequency.
In daily maintenance work, the water-lubricated oil-free air compressor needs to check whether there is dripping water and whether there is air leakage in the pipeline leading to insufficient pressure. Whether the temperature heat dissipation of the air compressor room is good, and whether the air outlet temperature of the air compressor is normal.
With the rapid development of industry, society's requirements for the required products have been greatly improved; at the same time, the improvement of the precision of pneumatic components has prompted higher and higher requirements for compressed gas oil and water content. In the past, all oil-free air compressors New products are greatly constrained by quality problems
Whether the air compressor room needs anti-explosion or not involves many considerations. The following is a detailed analysis of this problem: Risk analysis of 1. air compressor room Explosion risk: During the operation of the air compressor, if the operation is improper Or the equipment is defective, it is possible
The material selection of the water lubricated oil-free air compressor is to ensure oil-free compression, corrosion resistance and efficient operation as the core. The specific material applications are as follows: 1. Core compression parts screw and star wheel: 304/316 grade stainless steel or special alloy materials are used. This
Description of technical specifications on compressed air quality classification In the field of compressed air applications, the industry has developed air quality classification standards to ensure the reliability of gas use in different scenarios. The standard provides a basis for equipment selection and system design by quantifying key indicators.
Cold dryer and air compressor are not special equipment. Special equipment refers to boilers, pressure vessels (including gas cylinders, the same below), pressure pipes, elevators, lifting machinery, passenger ropeways, large-scale amusement facilities and special facilities in the field (factory) that involve life safety and are more dangerous.
The maintenance methods of the screw machine mainly include the following aspects: regularly check the oil level and oil quality: ensure that the oil quantity is sufficient and the oil quality is clean, if there is any problem, it should be supplemented or replaced in time. At the same time, pay attention to check the cleanliness and smoothness of the oil circuit. Cleaning and replacement
In modern industrial production, compressed air, as an important power source and process medium, is widely used in the production process of various factories. The requirements of compressed air in ordinary factories involve pressure, temperature, dryness, oil content and purification, etc.
Q: the difference between oil injection and micro oil air compressor answer: oil injection air compressor oil content comparison micro oil air compressor oil content will be more. The oil-injected air compressor did not carry out more detailed treatment of the exhaust gas, and the micro-oil air compressor handled it relatively better, but in essence it was changed.
Each gas-consuming equipment (such as pneumatic tools, spraying equipment, packaging machinery, etc.) will be marked with a rated gas consumption (in cubic meters per minute or liters per minute). Add up the gas consumption of all equipment running at the same time to obtain the theoretical total gas consumption.
The screw air compressor can be operated for 24 hours. The air pressure is not enough to load automatically, the air pressure is enough to unload automatically, and the idle time exceeds the rated time to stop automatically, thus realizing unattended for 24 hours. Air compressor can insist on continuous work.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
