2026-04-15Views：
Air compressor capacity description
the air volume index of the air compressor refers to the volume of compressed air that the equipment can stably output per unit time, namely outlet volume. This parameter directly reflects the ability of the equipment to provide compressed air to the gas system.
During the operation of the air compressor, the air undergoes the following processes:
The core value of gas volume index:
the air volume parameter of the air compressor is based on the air output for the following reasons:
Summary: The air volume of the air compressor refers specifically to its air output, which is the core basis for equipment selection, system design and energy efficiency evaluation. Understanding the gas volume index will help enterprises to reasonably configure the compressed air system, ensure the continuity of production, and realize the efficient use of energy.
Answer: When the gas requirements are high, it is necessary to choose an oil-free air compressor. There are many oil-free air compressors on the market, so we must judge whether it is really oil-free.
General purpose cold dryer is enough, high requirements on the suction dryer, the optimal solution is cold dryer and suction dryer in series, water lubrication oil-free air compressor with this combination of water treatment problem is very suitable.
There may be many reasons for the high temperature of the compressor of the cold dryer. The following are some of the main reasons and corresponding solutions: Reasons: Insufficient compressor oil or poor oil quality: Insufficient oil or poor quality will cause the compressor to generate When the heat cannot be
The air compressor of the fermenter shall be equipped with the fermentation process requirements, air compressor performance parameters, system matching and safety and environmental protection requirements. The following are the specific configuration points: 1., the gas consumption required for the fermentation process shall be calculated according to the volume and stirring power of the fermenter.
Factory air compressor conventional air pressure: In the factory environment, the conventional air pressure of the air compressor is usually determined according to the specific application requirements. Generally speaking, the output pressure range of industrial air compressors is 5-13 bar (I .e. 500-1300 kPa or 72.5-188.5 psi)
Question: What is the relationship between the exhaust pressure and the flow rate of the 22kw air compressor? Answer: The higher the pressure, the lower the gas flow rate. Take the water-lubricated oil-free screw air compressor produced by GW22A/W as an example: 0.8MPa pressure row
Answer: The moisture in the air tank of the air compressor comes from the compressed gas, and the atmosphere has air humidity. If the air compressor room environment has high humidity, the water in the air tank can easily exceed the standard. In use
Water-lubricated air compressors are becoming more and more mainstream gas supply options in the semiconductor industry because they eliminate oil pollution from the source, have high efficiency, low maintenance, and have good effects with post-processing equipment. The air is clean, the chip can be clean, the product can be qualified.
Oil-free air compressors have significant advantages in terms of work safety and ease of operation, especially in industrial scenarios where air cleanliness is required or safety standards are strict. Granklin water-lubricated single screw air compressors are further improved through innovative design and technical optimization.
The drainage process of the screw air compressor can be carried out through the following steps: Manual drainage method: First, tighten the drainage valve and turn off the oil pump. Next, the pressure relief valve knob is rotated counterclockwise to relieve the pressure inside the reservoir. Open reservoir
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
