2026-04-09Views：
Granklin screw air compressor, adjust the pressure can contact us by phone, we will customize the pressure according to your needs.
Granklin accepts calls from various factories according to their needs, such as medium pressure screw air compressor, low pressure screw air compressor, process gas air compressor, etc.
In the air compressor factory debugging, according to customer needs to adjust to the specified pressure, and then set a pressure difference.
for example, the compressor starts to pump air into the air storage tank. When the pressure reaches 10kg, the air compressor stops or unloads. When the pressure reaches 7kg, the air compressor starts to start again. There is a pressure difference here. This process can give the compressor a rest to protect the air compressor.
Different air compressor switches have different adjustment methods. One is that the pressure difference is fixed by the switch itself, and only the automatic shutdown pressure is adjusted and the pressure is increased. This kind of knob with two flat-blade screwdriver debugging on the switch must be adjusted in the same way, otherwise it will stop when moving together, stop and start again, and burn out the electrical appliances. The other is an adjustable starting pressure (low pressure) and a mediator pressure (high pressure).
air compressor pressure adjustment:
a. Turn the pressure adjustment screw clockwise to increase the closing and disconnecting pressures simultaneously.
B. Turn the pressure adjustment screw counterclockwise to reduce the closing and opening pressures simultaneously.
Air compressor differential pressure adjustment:
a. Turn the differential pressure adjusting screw clockwise, the closing pressure remains unchanged, and the disconnection pressure increases.
B. Turn the differential pressure adjusting screw counterclockwise, the closing pressure remains unchanged, and the disconnection pressure decreases.
When there is water in the air compressor pipeline, the following measures can be taken to deal with it: 1. confirm the cause of water production First, it is necessary to clarify the cause of water production in the pipeline so that targeted measures can be taken. Common causes include water vapor condensation due to insufficient cooling of the air compressor,
The loud noise of the screw compressor when it is just started may be caused by a variety of reasons. The following are some possible reasons and solutions: Motor or transmission system failure: Motor or transmission system failure, such as bearing damage, gear wear or shaft shaking Wait, can be
Compressed air plays a vital role in modern hospitals, especially in supporting various medical equipment and systems. In this regard, the water-lubricated screw air compressor produced by Shanghai Granklin Group provides hospitals with excellent performance and high quality.
When protecting the work area where the air compressor is placed, we can take a series of measures to ensure the safety of personnel and equipment. First of all, choose a flat, stable and spacious placement position for the air compressor to ensure its stable operation and reduce the impact of vibration or tilt.
Q: air compressor what enterprises use? A: air compressor is a general machinery, a wide range of applications. Note: The items used in our lives, special gases (oxygen, argon, nitrogen, etc.), are available during production and processing.
1. According to its principle, it can be divided into volume type compressor and speed type compressor. Volume type is divided into: reciprocating compressor, rotary compressor; speed type compressor is divided into: axial compressor, centrifugal compressor and mixed flow compressor. Household today.
The rated pressure and working pressure of the air compressor are the key parameters for selection and use, and their range varies with equipment type and application scenario. The following is a detailed description: 1. rated pressure definition: air compressor at rated speed, rated conditions under continuous operation of the highest exhaust
The standard compressed air consumption of numerical control lathe (numerical control machine tool) varies depending on the equipment configuration, process requirements and production rhythm. The reference air consumption of a single numerical control machine tool is usually 0.3m & sup3;/min to 1.5m & sup3;/min, depending on the equipment work
The air compressor does not pump air (or called "unable to pump air", "insufficient pressure", etc.) may be caused by a variety of reasons. The following are some common causes and their corresponding solutions: 1. electrical problems Power lines or power switches
The reasons for the overload of the air compressor can be summarized as follows: The air filter is clogged: When the air filter is clogged, it will hinder the air flow and cause the compressor to overload. Compressor inlet valve failure: Intake valve failure will affect compressor inlet
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
