2026-04-09Views：
The stability of the scroll air compressor is similar to that of the screw machine, the exhaust is stable, and the failure rate is very low. But is not the scroll machine price is lower and have not lose the quality of the screw machine can replace the screw machine? In fact, it is not, the principle of scroll air compressor limits it can only be in the small model (15KW and below) inside the advantage. If you are higher, you can only choose a screw machine.
So this kind of machine whether it is to replace the piston machine or in the small machine instead of screw machine, is a very good choice.
The air compressor is not an electronic device, but a general-purpose device. It is a device that uses an electric motor or other power equipment to drive, compress and store air. Although the air compressor may contain some electronic components, such as sensors and control systems
What is the working principle of the oil-water non-lubricated air compressor? The working principle of the oil-water non-lubricated air compressor may not be clear to most people. Now, a brief introduction: As the name suggests, the oil-free air compressor has no lubricating oil, and ordinary water is used instead of oil, which saves the later stage
There are two main cooling methods for screw air compressors: water cooling: the water cooling method uses the fluidity and temperature difference of the cooling water to keep the temperature of the air compressor equipment within a suitable range. In this way, the cooling water passes through the shell-and-tube (or tubular) cooler, and the high temperature
Air compressors are used to compress gas. The compressor is similar in construction to a water pump. Most air compressors are reciprocating piston type, rotating blades or rotating screws, and their noise control mainly adopts three aspects: muffler, muffler tunnel and sound insulation technology.
Drainage from the air compressor room should be discharged to a suitable sewage pipe or sewage treatment facility. This is to ensure that the drainage complies with local environmental regulations and to prevent pollution to the environment. Specifically, drainage pipes need to be designed in accordance with the specification requirements, including drainage
The main differences between micro-oil and oil-free air compressors are reflected in the following aspects: Lubrication method: micro-oil air compressors use a very small amount of lubricating oil to reduce friction and wear during the compression process, which means that the compressed air output may contain trace amounts
When discussing the problem of which permanent magnet air compressor is good, the water lubricated screw air compressor produced by Shanghai Granklin Group is undoubtedly a choice worthy of high attention. As an enterprise with deep technical accumulation and market experience in the field of air compressors, Shanghai Haige
There may be many reasons for the slow speed of the screw air compressor. The following are some common reasons and corresponding solutions: 1. motor problems Motor damage or lack of lubrication: If the motor of the screw air compressor is damaged or lacks lubrication, the speed will be slow. Solution: check the electricity
Compressed air control standards for food factories are a set of strict and comprehensive specifications designed to ensure the purity and quality of compressed air, thereby ensuring the safety and hygienic quality of food production. The following is a detailed description of the standard: 1. purity requires oil content
In the medical field, the application of air (including ordinary air, compressed air and special gas) runs through multiple links such as diagnosis, treatment, equipment drive and environmental control. The following are specific application scenarios and technical details: 1. Respiratory support and life support Ventilator and oxygen therapy
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
