2026-04-14Views：
The displacement on the nameplate of the air compressor refers to the air compressor unit time discharged, converted to the air volume in the suction state. This is a key indicator to measure the performance of an air compressor, indicating the volume that a piston can discharge from one stroke to another.
Specifically, the displacement on the air compressor nameplate usually refers to the volume of uncompressed air sucked by the air compressor under standard atmospheric pressure and temperature conditions. This parameter is very important for users, because it is directly related to the air compressor's gas production capacity and scope of application. For example, when choosing an air compressor, users need to determine the required exhaust volume according to their actual needs to ensure that the equipment can meet the needs of production or use.
In addition, for the screw air compressor, the displacement is proportional to the speed. The speed will change with the fluctuation of the grid voltage and frequency. Therefore, in practical applications, users need to pay attention to the stability of the grid voltage and frequency to ensure that the displacement of the air compressor can be kept within the normal range.
To sum up, the displacement on the nameplate of the air compressor is an important performance index, which reflects the gas production capacity and scope of application of the air compressor. When selecting and using an air compressor, users should fully consider this parameter, and make reasonable selection and adjustment according to actual needs.
The replacement cycle of air compressor screw oil should be combined with the oil type, operating environment, equipment conditions and manufacturer's recommendations, usually 2000-8000 hours. The following is a specific analysis: 1. the key factors affecting the replacement cycle Oil type Mineral oil: replacement
The amount of air supplied by a compressor is conceptually closely related to its output, but strictly speaking, they are not identical. Air supply usually refers to the volume or flow of compressed air that the compressor can provide per unit of time, which is a measure of compressor performance.
The air production of air compressors in industrial workshops varies according to the model, working pressure and the specific needs of the workshop. In general, smaller manufacturers or low gas demand occasions, such as family or small car, air compressor gas may be 1~5 cubic meters/minute. For scale
When choosing an air compressor, if the instantaneous gas consumption is large, the following key factors need to be considered to ensure that the air compressor can meet the demand: Determine the gas demand: First, accurately estimate or measure the maximum gas consumption at the moment. This usually involves setting up for production.
The failure of the air compressor may be caused by a variety of reasons. The following are some common failures and their solutions: 1. exhaust temperature and high temperature sensor failure: It is recommended to replace the temperature sensor. Lubricating oil problem: the lubricating oil specification is not correct
Answer: In the industrial field, compressed air is an important power source and process gas, which is widely used in various industrial production processes. However, in compressed air applications, there is an important need
The price of low pressure screw air compressor varies with brand, model, power, configuration and other factors. As an air compressor manufacturer, Shanghai Grankering Group provides various types of screw air compressors, including low-pressure screw air compressors. However, the specific price needs to be based on the customer.
Poor screw oil will cause the following problems: poor lubrication performance: cause insufficient lubrication of the host, accelerate the wear of parts, shorten the service life of the equipment, and even damage the host in severe cases. Reduced thermal conductivity: the heat absorption capacity decreases, so that the operating temperature of the unit increases. 1
Q: 21 cubic air compressor how many kilowatts? A: 0.8Mpa pressure about 132 kW, 1.0Mpa about 160 kW. (The actual gas volume shall be subject to the parameters provided by the manufacturer) Reference: Shanghai Granklin Group Water Lubricated Oil-free Air Compressor Product Hand
Compressed air quality is a comprehensive indicator, which involves the compliance of many key parameters in compressed air. These parameters directly affect the performance and safety of compressed air in different industries and application scenarios. The following is the quality of compressed air rigorous and detailed
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
