Air compressor use method and matters needing attention

The use of air compressor and matters needing attention is the key to ensure the safe and efficient operation of the equipment, the following is a detailed description of these two aspects:

method of use

1. preparation before start-up:
   • check whether the parts of the air compressor are in good condition, whether the fastening bolts are loose, and whether the transmission parts such as belts or chains are properly tensioned.
   • Ensure that there is no debris around the air compressor, good ventilation, and the power connection is correct and stable.
   • Open the air compressor exhaust valve to start the air compressor under no load.
2. Startup and Operation:
   • start the equipment according to the air compressor operating procedures, pay attention to observe the readings of pressure gauges, thermometers and other indicating instruments to ensure that the equipment operates within the normal range.
   • Adjust the output pressure of the air compressor as needed to meet the work requirements.
   • During operation, check the operating status of the air compressor regularly. If abnormal sound, vibration or excessive temperature rise are found, stop the machine immediately for inspection.
3. Shutdown and maintenance:
   • before shutdown, the intake valve should be closed to make the air compressor run for a period of time under no load to discharge the residual gas in the machine.
   • After shutdown, disconnect the power supply, close the exhaust valve, and perform necessary cleaning and maintenance on the air compressor.
   • Regularly check the lubricating oil, filter screen and other vulnerable parts of the air compressor, and replace or clean them in time.

Precautions

1. safe operation:
   • when operating the air compressor, you should wear appropriate labor protection articles, such as safety helmet, protective glasses, etc.
   • It is forbidden to carry out maintenance or adjustment work during the operation of the air compressor to avoid accidents.
2. reasonable use:
   • according to the performance of the air compressor and operating instructions, the use of reasonable selection of scenarios and conditions to avoid overload operation.
   • Regularly check the electrical system and mechanical parts of the air compressor to ensure that they are in good condition.
3. Environmental protection:
   • in the use of air compressor, should pay attention to reduce the noise and vibration, the impact on the surrounding environment.
   • The discharged gas shall comply with the relevant national environmental protection standards to avoid pollution to the atmospheric environment.
4. Maintenance:
   • establish a sound air compressor maintenance system, regular cleaning, inspection and maintenance of equipment.
   • The faults or problems found should be dealt with in time to avoid affecting the normal operation and service life of the air compressor.

In summary, the correct use of air compressors and compliance with relevant precautions are important guarantees for the safe and efficient operation of equipment.