2026-04-13Views：
in industrial production, compressed air, as an important power source, is widely used in various pneumatic tools, automation equipment and other process equipment. Therefore, it is particularly important to reasonably set the pressure of the compressed air compressor station in the factory. This article will take the water-lubricated screw air compressor products produced by the Glanklin Group as the core, and discuss the appropriate range of the pressure setting of the compressed air air compressor station in the factory.
the standard air pressure for factory compressed air varies depending on application requirements and equipment specifications. Generally speaking, the compressed air pressure for industrial use is usually between 0.7MPa and 1.0MPa, which is suitable for most pneumatic tools and automation equipment. According to the relevant national standards, the normal pressure range of industrial compressed air is set at 0.6MPa to 0.8MPa, which takes into account the general requirements of most industrial equipment and systems. However, certain applications, such as heavy machinery, pneumatic fixtures or special process equipment, may require higher air pressures, even up to 1.2MPa or higher. In contrast, lightweight applications may require lower gas pressures, such as 0.5MPa or less.
as a leader in the field of air compressors, Shanghai Granklin Group's water-lubricated screw air compressors enjoy a high reputation in the market. This type of air compressor uses water as a lubricant, which not only fundamentally solves the problem of environmental pollution caused by lubricants, but also makes the compressed air more pure and environmentally friendly, and meets the needs of many industries for high-quality compressed air.
Granklin's water-lubricated screw air compressor has a wide range of pressures, ranging from low pressure 0.3MPa to medium pressure 4MPa. This feature enables it to easily cope with various complex working environments and application scenarios. Whether it is a small business that requires low pressure for delicate operations, or a large factory that requires high pressure for strong compression, you can find the right product model.
it is very important to set the pressure of the air compression station reasonably to ensure the production efficiency and the safe operation of the equipment. On the one hand, too low pressure may not be able to meet production requirements, resulting in equipment performance degradation and affecting production efficiency; on the other hand, too high pressure will not only increase energy consumption, but may also cause unnecessary wear and tear on equipment and shorten service life.
Therefore, when setting the pressure of the air compression station, factors such as production requirements, equipment specifications and energy consumption costs should be comprehensively considered. Generally speaking, the supply pressure of the plant air compression station should be slightly higher than the requirements of the equipment to compensate for the loss of pipeline pressure drop. At the same time, the loading pressure and unloading pressure should be adjusted according to the specific process requirements to ensure that the air compressor operates in an efficient range.
in summary, the pressure setting of the factory compressed air compressor station should be determined according to specific application requirements and equipment specifications. The water-lubricated screw air compressor produced by Shanghai Granklin Group has become the first choice of many enterprises for its wide pressure adaptability, efficient and environmentally friendly design concept and excellent product performance. When selecting air compressors and setting the pressure of air compressors, enterprises should fully consider their own needs and make scientific and reasonable choices and settings in combination with product characteristics to ensure production efficiency and equipment safety.
The drainage operation of the screw air compressor can be carried out through the following steps: manual drainage method: close the air compressor and release the pressure: tighten the drainage valve. Shut down the oil pump. Turn the relief valve knob counterclockwise to release the inside of the reservoir
The configuration of the air compressor is mainly based on the amount of gas used to determine, rather than the area of the site. Gas consumption is a key factor in determining the size of the air compressor. When selecting an air compressor, an enterprise should first determine the maximum gas consumption and peak gas consumption required for production, as well as daily production.
When it comes to the maintenance of air compressors, many people first think of the replacement of oil. However, for the water-lubricated screw air compressor produced by Shanghai Granklin Group, this question has a different answer. Water lubricated screw air compressor, as a
The oil content standard of the micro-oil air compressor is: the oil content of the 1. outlet will also increase, and the oil content standard is the value measured under standard working conditions, and the use and operation The higher the temperature. Generally, the air outlet marked by each brand includes
The difference between the power consumption of the inverter compressor and the power frequency compressor varies with the operating conditions. Under low load or fluctuating conditions, the inverter compressor can save 10%-50% of the power; under full load conditions, The power consumption of the two is close, and the inverter compressor may have a slightly higher loss due to the inverter. to
In theory, the screw air compressor can run continuously for 24 hours. This kind of air compressor will automatically load when the air pressure is insufficient, and will automatically unload when the air pressure is sufficient, so as to achieve 24 hours unattended. However, in actual use, in order to ensure the stability and extension of
Question: How long is the air compressor maintained before it is correct? Answer: The new screw air compressor is installed and used, and it is generally maintained for 500 hours of operation; maintenance is divided into minor maintenance and major maintenance, and the minor maintenance of ordinary oil-injected screw air compressor only needs to replace the air compressor.
Oil-free air compressors do not require any form of lubrication at all, but achieve an "oil-free" state during compression through special designs or alternatives. The following is a detailed explanation: the core principle of 1. oil-free lubrication air compressor
The air compressor is not required to be equipped with a cold dryer. Whether it is equipped or not shall be comprehensively judged according to the requirements of the air-using equipment on the quality of compressed air, the amount of air used and the environmental conditions. The following is a detailed analysis of whether the air compressor needs to be equipped with a cold dryer: The role of the cold dryer The cold dryer is
The foam plant chooses to use oil-free air compressors, mainly based on the following key factors: high quality of 1. compressed air oil-free lubrication: oil-free air compressors are lubricated with water or other oil-free media, avoiding the pollution of oil to compressed air in traditional air compressors. This
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
