2026-04-13Views：
In industrial production, compressed air, as an important power source, is widely used in various fields. For general industrial applications, the pressure requirement of compressed air is a critical parameter. In general, the pressure range of general industrial compressed air is between 7bar and 10bar, which is converted into Pascal units, that is, about 700kPa to 1000kPa. This range can meet the needs of most pneumatic tools, automation equipment and other industrial applications.
However, it is worth noting that different industrial applications may have different pressure requirements for compressed air. For example, some heavy machinery or specific process equipment may require higher pressures, while some delicate or sensitive equipment may require lower pressures. Therefore, when selecting a compressed air system, it is necessary to determine the appropriate pressure range according to the specific application scenario and equipment requirements.
The water-lubricated screw air compressor produced by Shanghai Granklin Group has been widely used in industrial production due to its high efficiency, energy saving and environmental protection. The product can not only provide a stable and reliable compressed air source, but also avoid the pollution of lubricating oil to compressed air through water lubrication technology, and improve the purity of compressed air. At the same time, Shanghai Grankering Group can also provide customized solutions according to customer needs to ensure that the pressure, flow and quality of the compressed air system meet the requirements of specific industrial applications.
In summary, the pressure range of general industrial compressed air is between 700kPa and 1000kPa, but the specific value needs to be determined according to the application scenario and equipment requirements. As an advanced compressed air equipment, the water-lubricated screw air compressor produced by Shanghai Granklin Group can provide a stable, reliable and pure compressed air source for industrial production to meet the needs of different industrial applications.
The moisture in the air inside the air compressor is usually generated by high ambient humidity or condensation when compressed air is cooled. In order to remove the moisture in the air inside the air compressor, the following measures can be taken: Use a dryer: Install a dryer in the compressed air of the air compressor
The maintenance cycle of the screw air compressor usually depends on the use of the equipment and the manufacturer's recommendations. Generally speaking, the maintenance cycle of the screw air compressor can consider the following aspects: Operating hours: Many manufacturers recommend running the equipment for a certain number of hours
The service life of compressed air storage tanks can be summarized from the following aspects: 1. design life According to national standards and relevant regulations, the design life of air storage tanks should be specified in the design, and this design life is usually 10 to 15 years.
Air compressor load operating pressure refers to the air compressor in the actual working process, in order to meet the needs of gas equipment and continuous output of compressed air pressure value, this parameter directly reflects the performance of the air compressor in the load state.
The manufacturing materials and process requirements of the micro-oil air compressor are as follows: 1. core manufacturing materials, main frame and moving parts steel: crankshaft, connecting rod, crosshead pin and other key moving parts are usually forged with 45 steel to ensure high strength and wear resistance. For example, the crankshaft
Permanent magnet variable frequency screw air compressor combines permanent magnet synchronous motor and variable frequency speed regulation technology. It has the advantages of high efficiency, energy saving, stable operation and low maintenance cost. It is widely used in industrial fields with high requirements on compressed air quality, energy consumption and stability. The following is its
The frequency of air compressor filter element replacement depends on a number of factors, including the environment in which the compressor is used, the workload, the type of filter element, and the manufacturer's recommendations. The main function of the filter element is to filter the dust, impurities and moisture in the air entering the air compressor to protect
Compressed air, as an important infrastructure of the modern medical system, undertakes multiple key functions in the ward environment, which is directly related to the safety of patients and the quality of medical care. Comprehensive technical analysis and industry practice
The gas storage tank is a special equipment, and the 10-year warranty given by the manufacturer is actually the "recommended service life", which does not mean that it will be automatically scrapped in the 10th year and 1st day. For example, just like the recommended maintenance mileage of a car, it does not mean that the engine will break down immediately. The key is to look at the actual state.
When choosing an air compressor, when transitioning from an oil-injected screw air compressor to an "oil-free screw air compressor", we will always have doubts about unknown products that we do not understand ". After all, air compressor family after years of development, has produced many kinds of compressor. The "water-lubricated screw air compressor" produced by Shanghai Granklin Group is one of the "oil-free screw air compressors.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
