2026-04-13Views：
In the field of oil-free air compressors, the oil content of the gas is a crucial indicator, which is directly related to the purity of the compressed air and the applicability of the application field. The water-lubricated screw air compressor produced by Shanghai Granklin Group has shown excellent performance in this regard.
Traditionally, we believe that the gas oil content of oil-free air compressors should be extremely low, even close to zero. However, the so-called "oil-free" air compressors on the market are often difficult to fully meet this standard. The water-lubricated screw air compressor of Shanghai Granklin Group has achieved a real low oil content through the use of advanced water lubrication technology.
This water-lubricated screw air compressor eliminates the need for lubricating oil during compression, thus avoiding the impact of oil and gas mixtures on air quality. Its oil content standard is far lower than the industry standard, and can even reach below 0.01ppm, which is almost equivalent to an oil-free state. This means that the gas discharged from the air compressor is extremely pure and contains almost no oil, which is very suitable for occasions with extremely high air quality requirements, such as food, medicine, electronics and other industries.
In addition, Granklin water-lubricated screw air compressor also has the advantages of compact structure, small footprint, high efficiency and energy saving, environmental protection and reliability. Its advanced control system and efficient motor design not only realize intelligent operation and remote monitoring, but also greatly improve the level of energy efficiency and reduce energy consumption. These characteristics make Granklin water lubricated screw air compressor stand out in the market and become the first choice for many users.
In summary, the water-lubricated screw air compressor produced by Shanghai Granklin Group provides users with high-quality compressed air solutions for its extremely low oil content and excellent performance.
Take a look at it every day, check it every week, and do physical examination every month. The water lubricated air compressor should pay more attention to the water circulation and water quality at this rhythm. The overall inspection burden is lighter than that of traditional machines.
The requirements of the electronics industry for compressed air usually include the following aspects: Purity: Due to the precision of electronic products and the high requirements for the production environment, compressed air must be very pure. This includes the control of solid particles, oil, microorganisms and other contaminants.
The oil content of compressed air depends on the industry demand and equipment configuration, and is usually graded by ISO 8573-1 standard. The following is the key information: 1. oil content grade standard grade oil content (mg/m & sup3;) applicable scenario level 1 ≤ 0.
Compressed air for medical use shall be treated by multi-stage filtration, drying and sterilization to ensure that the air is free of oil, particulate matter and microorganisms and meets the medical gas standards. The system is usually equipped with redundant design, combined with online monitoring device real-time feedback pressure, dew point and other parameters, to ensure the safety of the medical process.
Specification for Pressure Setting of Industrial Nitrogen Adaptability Analysis of Glinklin Water Lubricated Air Compressor Industrial nitrogen is the core process gas, and its pressure setting should take into account process requirements, equipment performance and safety standards. The following from the general pressure range, industry special requirements pass
The energy consumption of oil-injected air compressor and oil-free air compressor is compared as follows: Oil-injected air compressor: During the working process of the oil-injected air compressor, the compressor needs to be lubricated and cooled through the oil injection system, so it will consume a certain amount of Lubricating oil. At the same time, due to the lubrication of the oil-injected compressor.
The relationship between the power and flow of the air compressor is simply the relationship of "great strength and more work. Power is like the "physical strength" of the compressor. The greater the power, the more "strength" the compressor can provide. And flow
The advantages of the oil-cooled permanent magnet air compressor include: because the main machine and the permanent magnet motor rotor adopt an integral shaft, the transmission efficiency is as high as 100. There is no bearing in the permanent magnet motor, which saves the cost of 2 bearings, and at the same time completely bid farewell to bearing maintenance. Oil
Air compressors are widely used in many industries. The following are some industries and equipment that mainly use air compressors: Machinery manufacturing and automation: CNC machine tools: used for automatic tool change, fixture positioning, chip cleaning, etc. Automation equipment: such as assembly
Brand Granklin Brand advantage stable and durable service industry big brand cooling method water cooling/air cooling Type Integrated Company Name Shanghai Granklin (Group) Co., Ltd. Transmission Mode
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
