2026-04-13Views：
Ordinary oil can not replace air compressor oil. Although there are some similarities between oil and air compressor oil in function, such as lubrication, cooling, etc., their application scenarios and characteristics are not exactly the same. Here are a few key reasons:
difference in use: The engine oil is mainly designed for the internal design of the engine, which plays the role of lubrication, cooling, sealing, and cleaning. The air compressor oil is specially designed for air compressors, used to lubricate and cool moving parts such as cylinders and pistons, and work in harsh environments such as high temperature, high pressure, and high humidity.
Composition and characteristics are different: engine oil is composed of base oil and additives, and contains some special oil formula. Air compressor oil is also composed of base oil and additives, but its additives pay more attention to anti-oxidation, anti-emulsification, anti-foam and other characteristics to adapt to the working environment of the air compressor.
Viscosity grade: There are many choices of viscosity grade of engine oil, which are selected according to the working environment and use requirements of the engine. The viscosity grade of air compressor oil is usually lower to reduce the resistance of compressed air.
Working environment and requirements: The working environment of air compressors is even worse, and they often face conditions such as high temperature, high pressure, and high humidity. Therefore, air compressor oil needs to have higher performance requirements, such as excellent high temperature oxidation stability, low carbon deposition tendency, suitable viscosity and viscosity temperature performance. These characteristics are not available in ordinary oil.
In summary, due to the significant differences between engine oil and air compressor oil in terms of use, composition, viscosity grade, working environment and requirements, ordinary engine oil cannot replace air compressor oil. In the selection of lubricating oil, according to the working environment and requirements of the equipment, select the appropriate special oil.
Air compressor compressed air water, may be caused by the following reasons: 1. external air humidity affects the moisture content in the air: the air itself contains a certain amount of water molecules, especially in the humidity of the environment, the moisture content in the air is higher. When these
The difference between the power consumption of the inverter compressor and the power frequency compressor varies with the operating conditions. Under low load or fluctuating conditions, the inverter compressor can save 10%-50% of the power; under full load conditions, The power consumption of the two is close, and the inverter compressor may have a slightly higher loss due to the inverter. to
The need for oil-free operation of screw compressors used in the chemical industry depends on the specific application scenario, process requirements and the type of compressor design. Generally speaking, screw compressors can be divided into oil and oil-free two types. with oil snail
The energy efficiency of scroll compressors and screw compressors is not exactly the same. Each of them has different characteristics and application scenarios, so there are differences in energy efficiency. Scroll compressors usually have high adiabatic efficiency, which means that when compressing gas
Air compressor oil-free and refueling have their own advantages and applicable scenarios, the choice of which is better depends on the specific needs and conditions of use. The main advantages of oil-free air compressors are: clean: because oil is not used for lubrication, the compressed air produced is more
The standard of compressed air in the machining center mainly includes the following aspects: Pressure stability: The compressed air used in the machining center needs to maintain a stable pressure output. In general, the pressure should be between 6-8bar, there are also requirements pressure in 0.7-1.0 MPa (MPa)
Generally, the air pressure in the factory is not a fixed value, but is adjusted according to the specific equipment requirements and production process. However, you can refer to some common air pressure ranges: the air pressure standard of the factory air compressor is usually between 0.6-0.8Mpa, which is equivalent
Oil-free, water lubrication is now the mainstream products in the air compressor market, mechanical equipment sales more, there will be some more common problems feedback. What is the reason for the slow pumping of water lubricated air compressor? Air compressor flow reduction, in any one air compressor manufacturers, are currently unable to solve. Naturally, we can't see this kind of situation for new machines. If the time span is 3 or 5 years, it is normal for compressed gas flow to decay.
View detailsIn the medical field, air compressor units play a vital role, especially in the supply and treatment of medical gases. The water-lubricated screw air compressor produced by Shanghai Granklin Group, with its excellent performance and environmental protection characteristics, has become a medical gas system.
1. According to its principle, it can be divided into volume type compressor and speed type compressor. Volume type is divided into: reciprocating compressor, rotary compressor; speed type compressor is divided into: axial compressor, centrifugal compressor and mixed flow compressor. Household today.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
