2026-04-10Views：
In general, the air pressure of the factory air compressor is generally 0.8Mpa, also known as 8kg pressure, and the specific value can be adjusted according to user needs. The unit of air pressure is "Pascal" (Pa), usually expressed in "bar" or "kilogram. For example, the standard air pressure requirement for car tires is usually between 2.4 and 2.5 bar, for reinforced tires it is between 2.8 and 2.9 bar, and should not exceed 3.5 bar. The air pressure required for the automatic painting process in automobile manufacturing is generally 0.3 to 0.5MPa, that is, 3 to 5 kgf/cm2.
In actual operation, the setting of air pressure needs to be adjusted according to the requirements of the equipment and the operation manual to ensure the normal operation and production efficiency of the equipment. Therefore, when determining the air pressure of a specific factory machine, it is necessary to refer to the technical parameters of the equipment and the production process requirements.
In addition, it should be noted that the pressure is generally expressed in kilograms in engineering, and 1kgf(1kg) is equal to 100000Pa, I .e. 0.1 MPa. At the same time, the air pressure unit also includes kPa, psi, bar, etc., which need to be converted according to the specific situation. In the spot inspection of machinery and equipment, it is usually necessary to measure and set the air pressure. At this time, it is necessary to select the correct air pressure unit and make the necessary conversion. At the same time, it is necessary to pay attention to ensure the stability and accuracy of the air pressure, and replace the aging and damaged pressure gauges and other measuring instruments in time.
In short, for general factory machines, the air pressure usually needs to be adjusted according to specific equipment requirements and production processes. In the operation of the need to pay attention to select the appropriate unit and the necessary conversion, in order to ensure the normal operation of the equipment and production efficiency.
Answer: oil-free air compressor oil content is 0.01ppm, why the gas will still appear in the oil, we breathe in the atmosphere more or less there will be a little oil, for the human body is very, very little. On
Yes, air compressor belongs to mechanical equipment. Air compressor is the abbreviation of air compressor. It is a kind of equipment used to compress gas and belongs to the type of general machinery. Air compressor is the basic product of industrial modernization. It is often said that there is full pneumatic in electrical and automation.
The frequency conversion and power frequency of the air compressor have their own advantages and disadvantages, and the specific choice depends on the actual needs and scenarios. Power frequency air compressor: Advantages: simple structure and convenient maintenance. The initial purchase cost is relatively low. Disadvantages: higher energy consumption, especially in
Whether the air compressor can run continuously for 24 hours depends on many factors. Generally speaking, high-quality air compressors, especially industrial-grade air compressors, such as water-lubricated air compressors, oil-free air compressors, frequency conversion air compressors and screw air compressors produced by Shanghai Granklin Group.
The replacement cycle of the filter element of the air compressor pipeline filter is a problem that needs to be flexibly judged according to the actual situation. Generally speaking, a good air compressor pipe filter can be used continuously for 1500-2000 hours, but the specific replacement time still needs to consider the following factors: 1.
Advantages of the water-lubricated single-screw air compressor scheme: 1. The two star wheels of the single-screw air compressor are well structured in the symmetrical positions on both sides of the screw, so that the single-screw air compressor not only has no unbalanced inertial force, but also acts on the screw. The axial force and radial force are also against each other
Air compressor from the early piston air compressor, in recent years, constantly updated technology, in response to the industrial upgrading of enterprises, granklin group air compressor has achieved water lubrication oil-free industrial quality. At present, the pharmaceutical industry, the food industry on the gas source requirements are very high, industrial upgrading has become a must. Eliminate the old-fashioned oil-free air compressor and replace it with a new oil-free air compressor. In particular, Granklin energy-saving variable frequency air compressor can be very good, for enterprises to save energy, reduce power consumption. In response to the national call, energy conservation is a top priority and can also reduce business expenses.
View detailsThe principle of permanent magnet variable frequency air compressor is to replace the excitation winding with permanent magnet for excitation. When the three-phase stator windings of the permanent magnet motor (each with a difference of 120 ° electrical angle) are connected to the three-phase alternating current with a frequency of f, a rotation at a synchronous speed will be generated
Oil-free air compressor does not need to use air compressor oil in design. Through special design and technical means, this air compressor ensures that it does not come into contact with oil during the compression process, thereby providing oil-free compressed air. Therefore, under normal circumstances, the oil-free air compressor does not need
In industrial production, selecting the appropriate pipeline output is essential to ensure the efficient operation of the air compressor system. For a 48 cubic air compressor, such as the water-lubricated screw air compressor produced by Shanghai Granklin Group, the design of the pipeline output needs to consider multiple factors.
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
