2026-04-13Views：
The standard of medical air compressor mainly includes the following aspects:
1. pressure and flow standards
pressure range: The pressure of the medical air compressor is usually determined according to the specific use requirements. Generally speaking, the output pressure of the air compressor for medical and health purposes is between 7-8bar(0.7-0.8MPa) to ensure the requirements of medical gas flow and purity. But there are also some special applications that may require higher pressures.
Flow requirements: the flow of medical air compressor should be able to meet the gas demand of medical equipment. The specific flow requirements depend on the type and number of connected devices.
2. technical control standard
gas production: Under the same power, the medical air compressor with higher gas production shows that its design is more scientific, more environmentally friendly and energy-saving, and its stability and durability will be better.
Air drying and cleanliness: The medical air compressor should adopt full oil-free lubrication technology, as well as the treatment of the inner wall of the compressor air chamber and the spray treatment technology inside the air tank to ensure that the output air is clean and fresh. Air cleanliness should meet certain standards, such as particles ≤ 0.05 μ, air dryness (moisture content) ≤ 0.05ppm.
3. Noise Control Standard
medical air compressors must be controlled within 60 decibels to ensure that medical staff work in a relatively quiet environment.
Environmental requirements for 4. use
the medical air compressor should work normally under the conditions of ambient temperature 5 ℃ ~ +40 ℃ and relative humidity ≤ 80% (non-condensing).
5. Safety Standards
the medical air compressor should comply with relevant safety regulations, such as overvoltage protection, overheat protection and other functions to ensure the safe operation of the equipment.
In summary, the medical air compressor standards cover pressure and flow, technical control, noise control, use of environmental requirements and safety standards and other aspects. Together, these standards ensure the performance, safety and reliability of medical air compressors to meet the stringent gas requirements in the medical field.
For the water-lubricated screw air compressor produced by Shanghai Granklin Group, correct maintenance is the key to ensure its long-term stable operation and efficient output. The following are some maintenance points for such oil-free air compressors: First, regular inspection
With the rapid development of society, the country has made great efforts to strictly control environmental protection production, and the application of oil-free silent air compressor, which is closely related to our life and work, has been vigorously promoted. How to use oil-free silent air compressor in the terminal, the market and industry will become more abundant
Microelectronic packaging has strict requirements on the quality of compressed air, mainly including the following aspects: particle concentration: due to the high precision of microelectronic products, tiny particle pollution may lead to product failure. Therefore, the particulate matter in the compressed air
Q: oil-free air compressor and oil air compressor which is good? A: oil-free air compressor. If conditions permit, the first choice is of course the oil-free air compressor, which has higher quality of compressed gas. The "water-lubricated air compressor" produced by Shanghai Granklin air compressor
In the glass bottle blowing industry, the use of oil-free air compressors is the key choice to ensure product quality and production efficiency. The following is a detailed analysis of the process requirements, the impact of oil pollution, the advantages of oil-free air compressors, etc.: the core requirements of the 1. glass bottle blowing process Glass bottle blowing
The main differences between the suction dryer and the cold dryer are as follows: Working principle: The suction dryer: The moisture in the compressed air is adsorbed by the adsorbent (such as silica gel, activated alumina, etc.) to achieve the drying effect. When the adsorbent is saturated, it needs to be regenerated.
The compressed air quality standards generally used in factories mainly include the following aspects: Oil content: The oil content in compressed air is usually required to be low to avoid pollution to equipment and processes. In general, the oil content should be less than 5mg/m3. Moisture content
Screw air compressor permanent magnet frequency conversion technology has a number of advantages, the following is a detailed summary of its characteristics: high efficiency and energy saving: the use of advanced gas control technology, compared with the traditional air compressor, screw air compressor permanent magnet frequency conversion in the same exhaust pressure can be more than 20 output
When it comes to the pharmaceutical industry, we all know that the pharmaceutical industry is a more rigorous industry, so the pharmaceutical industry for air compressor equipment requirements are relatively high, especially in terms of performance and air cleanliness, so now the pharmaceutical industry are beginning to use none
The reasons for the large vibration of the screw air compressor may be the following: the anchor or the imported filter screen fixing bolts are loose. In this case, the air compressor will vibrate due to unstable fixation during operation. Filter element of oil/gas separator is blocked or differential pressure sensor
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
