2026-04-10Views：
The industry standard of medical air compressor mainly includes the following aspects:
security:
medical air compressors must comply with relevant national safety standards.
Standards to be followed include ISO 7396-1 "Requirements for the verification of the design and installation of air and oxygen piping systems in medical institutions" and ISO 13485 "Medical devices-Requirements for quality management systems.
Cleanliness:
medical air compressors must be able to provide sterile or microbe-free compressed air.
Ensure that bacteria or other harmful substances are not introduced during medical procedures.
Stability:
medical air compressors should be able to provide stable air pressure and flow to meet the requirements of medical equipment and procedures.
Technical indicators (may vary with reference to specific models):
input pressure: 0.28~0.31Mpa @ 5L/min.
Output flow: 0 ~ 45L/min@0.28Mpa.
Noise:<50dB(A-weighted network).
With low-pressure alarm function, the alarm pressure is usually 0.2Mpa, and the alarm volume needs to be greater than 65dB(A-weighted network).
It shall be equipped with thermal alarm and thermal protection function. The alarm temperature is generally set to 75 ℃, and the overheat protection temperature is set to 85 ℃ (manual reset is required).
Environmental Adaptability:
the medical air compressor should work normally within a certain ambient temperature and humidity range, usually requiring an ambient temperature between 5°C and 40°C, and a storage temperature between -20°C and 60°C.
Storage humidity range should be 0 ~ 99%, storage atmospheric pressure between 86.0Kpa ~ 106.0Kpa.
Power and Electrical Safety:
the working power supply of medical air compressor is generally 220VAC 50HZ, and the power depends on the specific model (for example, 660W).
The electrical part shall comply with the relevant medical electrical safety standards to ensure the safety of operators.
Please note that the above standards may vary depending on the requirements of different countries, regions or specific medical institutions. When purchasing and using medical air compressors, refer to local regulations and standards, and consult professional medical equipment providers or relevant agencies to ensure compliance and safety.
The textile industry's requirements for compressed air are not only the oil content in the air, but also water and impurities. However, in these three items, the oil is more difficult to completely filter, so the quality of the gas used can be said to determine the grade of a textile enterprise. So
The quality standard of medical compressed air is usually stipulated by the national health department or industry standard. In China, the standard of medical compressed air is regulated by the "Hospital Compressed Air Quality Standard" (GB/T 14213-2013). In addition, medical compressed air should also be
Permanent magnet variable frequency air compressor is a kind of high efficiency and energy saving air compression equipment, which is widely used in industrial production and manufacturing fields. Its main uses can be summarized as follows: 1. Manufacturing applications Automobile manufacturing: providing high-quality products for automobile spraying, body grinding, body welding and other processes
The pressure range of compressed air varies depending on the application requirements, depending on the type of compressor, design specifications, operating conditions, and specific application scenarios. Generally speaking, in conventional applications, the pressure of compressed air is usually between 0.4MPa and 1.0MPa, which is equivalent to about 4
Water-lubricated oil-free screw air compressor is an efficient and environmentally friendly air compression equipment. Its main features include: oil-free lubrication: The compressor adopts water lubrication technology, which completely avoids the use of traditional lubricants. Therefore, the output compressed air is pure
Analysis of the application of air compressor in electroplating process In the electroplating production process, the air compressor is a key auxiliary equipment to ensure the stable operation of the process by providing compressed air. Its core role and specific application scenarios are as follows: 1. core functions and process support
Scroll air compressor and screw air compressor are two common types of air compressors. In industrial production, these two types of air compressors are used for air compression, gas transportation and bottle blowing.
Automatic drainage at the bottom is the most convenient, regular manual drainage is the most economical, and pneumatic drainage is the most thorough. If it is used together with a water-lubricated air compressor, the accumulated water is less and the water quality is clean. Any one of the three methods is enough, and the trouble of subsequent maintenance will be much less.
Q: Which brand is good for variable frequency air compressor? A: Shanghai Granklin Group. Shanghai granklin group is specialized in producing screw air compressor. water lubricated oil-free variable frequency air compressor is one of our series. you can contact us at any time if you need it.
In the search for an efficient, stable and environmentally friendly medium pressure screw air compressor, Shanghai Granklin Group is undoubtedly one of the most high-profile brands in the market. The group focuses on the development and production of air compressor technology, and its water-lubricated medium-pressure screw air compressor is based on its unique
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
