2026-04-10Views：
The replacement cycle of the oil filter element of the air compressor will be affected by many factors, including the frequency of use of the air compressor, the working environment and the quality of the oil filter element. In general, the air compressor oil filter replacement cycle can refer to the following recommendations:
initial operation of the new machine: the oil filter element should be replaced after 500 hours of initial operation of the new machine. This is because when the new machine is running for the first time, the oil filter element may be mixed with more metal wear debris and other impurities, which need to be replaced in time to ensure the normal operation of the air compressor.
Normal use: After the air compressor is used normally, it is recommended to replace the new filter element every 150 to 200 hours. This cycle can ensure that the oil filter element is replaced in time before it is blocked or damaged, so as to maintain the good running condition of the air compressor.
Harsh working environment: If the air compressor is used in a harsh environment, such as an environment with poor air quality or more dust, the replacement cycle of the oil filter element should be appropriately shortened. This is because in harsh environments, the oil filter element is more likely to be blocked and damaged, and needs to be replaced more frequently to ensure the normal operation of the air compressor.
In addition, there are some special cases to be aware:
if the oil filter element is blocked or damaged, it should be replaced with a new filter element in time to avoid damage to the air compressor.
While replacing the oil filter element, it is recommended to replace the oil to ensure that the lubrication system of the air compressor remains clean and efficient.
In summary, the replacement cycle of the oil filter element of the air compressor should be adjusted according to the actual situation. Under normal use, it is recommended to replace the new filter element every 150 to 200 hours; when used in harsh environments, the replacement cycle should be shortened appropriately. At the same time, it is necessary to regularly check the use of the oil filter element, and replace it in time if any abnormality is found.
In the pursuit of environmental protection and high efficiency, oil-free variable frequency screw air compressor has become a new favorite in industrial production. As an industry leader, Shanghai Granklin Group's water-lubricated screw air compressor products are well received by the market for their excellent performance and environmental protection.
The role of compressed air in the chip manufacturing process is very important, because some bubbles will be generated in the chip manufacturing process, and compressed air can be very good to discharge these bubbles to make the chip thinner, and the quality of the chip more Lighter.
Whether the oil core needs to be replaced for the first maintenance of the screw air compressor shall be comprehensively judged according to the following specifications: 1. to the manufacturer's standard industry routine. Most brands stipulate that the lubricating oil, oil filter and air filter shall be replaced for the first maintenance (500 hours), but the oil core is usually not covered by the first insurance.
The stability of the scroll air compressor is similar to that of the screw machine, the exhaust is stable, and the failure rate is very low. But is it not that the scroll machine can replace the screw machine with a lower price and a quality that does not lose the screw machine? In fact, it is not, the scroll air compressor
The service life of compressed air storage tanks can be summarized from the following aspects: 1. design life According to national standards and relevant regulations, the design life of air storage tanks should be specified in the design, and this design life is usually 10 to 15 years.
The power range of the 20 cubic air compressor is usually between 90KW and 160KW. The specific power may vary depending on the brand, model and working pressure. For example, under a working pressure of 0.75 MPa-1.3MPa(7.5-13kg), some common
As an important industrial equipment, air compressor will experience various changes in load and working environment during long-term operation, which will affect the performance and life of air compressor. Therefore, regular maintenance is to ensure that the air compressor sustained, stable, high
As a manufacturer of water-lubricated air compressors, Granklin Group has always tried its best to meet the needs of users. In the three series of power frequency air compressors, frequency conversion air compressors and permanent magnet frequency conversion air compressors, why do water-lubricated air compressors seldom do power frequency series?
In order to effectively remove the moisture in the compressed air, a series of technical measures can be taken. First, it is critical to understand the source of moisture in compressed air, which can come from ambient humidity, condensation during the compressed air process, and residual moisture in pipes or tanks.
"8kg air compressor" is a popular term in the industry, and its meaning can be understood from three dimensions: unit conversion, pressure level and practical application: 1. unit conversion: 1kg & asymp; 1 bar (bar)& asymp; 0.1 MPa (MPa). "8kg & r
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
