2026-04-10Views：
The oil content standard of the oil injection air compressor may vary due to different models and uses, but in general, for the oil injection screw air compressor, the oil content of the compressed air is usually not more than 3ppm (that is, the oil content per cubic meter of compressed air is not more than 3 mg) can be considered to meet the standard. When the oil content of compressed air exceeds this standard, it is usually referred to as high fuel consumption or oil running or flying oil.
Please note that this standard is a generally accepted standard, but specific applications may vary. In actual operation, the appropriate oil content standard should be determined according to the specific model and instruction manual of the air compressor.
In addition, for the fuel injection air compressor, in addition to paying attention to the oil content standard, the equipment should also be inspected and maintained regularly to ensure its normal operation and extend its service life. This includes replacing oil, oil filter and other accessories, as well as cleaning and checking the cooling system, air filter and other components. Through good maintenance and maintenance, the fuel consumption of the fuel injection air compressor can be reduced, and its work efficiency and reliability can be improved.
The pressure range of the plant gas source varies depending on the gas type and application requirements. In general, gas sources commonly used in factories include compressed air, inert gases (such as nitrogen, argon, etc.) and industrial gases (such as oxygen, acetylene, etc.)
6kg air compressor technical parameter analysis and selection guide In the field of compressed air system, "6kg air compressor" is a common technical expression in the industry, and its core parameter definition and engineering application are as follows: 1. basic parameter analysis "6kg" refers specifically to the rated discharge pressure of air compressor
Compressors are widely used in the food industry, mainly in the following aspects: 1. pneumatic operation In the food processing process, compressors provide power for pneumatic equipment, such as mixers, mixers and conveyor belts. These devices require continuous, stable compression of empty
In the blow molding process, the typical range of compressed air pressure is 0.2~1.0 MPa, and the specific value needs to be dynamically adjusted according to the type of plastic, parison temperature, product structure and process requirements. By providing clean, oil-free compressed air, oil-free air compressors become
Whether the air compressor will run for 24 hours depends on many factors. Generally speaking, high-quality air compressors, especially industrial-grade air compressors, have undergone rigorous design and testing, and usually have the ability to operate stably for a long time. However, even high-quality air compressors
The service life of air compressor is a complex problem, which is affected by many factors. Generally speaking, the life of the air compressor is about 10 to 15 years, but the specific life may vary due to factors such as equipment quality, operating environment, and maintenance. The following is a pair
The efficiency of screw air compressor is generally affected by many factors, including flow size, temperature, humidity, load rate and maintenance status. In general, the efficiency of the screw air compressor is usually between 75% and 90% **. Specifically:
Screw type air compressor sound is a common problem, which may be caused by a variety of reasons. The following are some possible reasons and corresponding solutions: Cause analysis Air flow pulsation: When the screw air compressor is working, the intake valve and the exhaust valve switch phase
As an advanced compressed air equipment, water-lubricated oil-free air compressor has many advantages, especially in the products of Shanghai Granklin Group. The following are some advantages of describing water-lubricated oil-free air compressors: 1. Environmental protection and friendliness:
In the electroplating factory, the air compressor has a wide range of applications. Electroplating is a process that uses the principle of electrolysis to plate a thin layer of other metals or alloys on the surface of certain metals, and the air compressor plays a key role in this process, mainly providing compressed air. Electroplating
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
