2026-04-09Views：
Air compressor is a big energy consumer in the factory. Ordinary air compressor can not achieve environmental protection and energy saving. For the energy saving and environmental protection advocated by the state, it is a rigid requirement that any air compressor manufacturer must meet.
So, energy-saving oil-free air compressor manufacturers which is good?
Shanghai Granklin Group focuses on the production of "water-lubricated oil-free screw air compressors". There are not many enterprises that can independently produce water-lubricated air compressors in the air compressor industry. Granklin Group has more than ten patented technologies, providing technical support for enterprises to produce oil-free air compressors.
As the granklin group, which leads the reform of environmental protection air compressor industry in China, the research and development of energy-saving air compressor is constantly carried out. We use variable frequency motor to realize variable frequency soft start: eliminate the peak current when starting, avoid the impact of the power grid, avoid the current impact through the step-by-step speed adjustment, and improve flexibility.
The energy-saving effect of variable frequency air compressor has been verified by many enterprises in the production process.
We ensure that the air of the oil-free air compressor does not contain oil, and provide users with clean and oil-free compressed air.
Permanent magnet air compressor has significant advantages in power saving, and its energy saving effect has been unanimously recognized by many technical literatures and industry reports. The following is a detailed analysis: 1. energy saving principle and core technology frequency control technology Permanent magnet air compressor adopts frequency conversion technology, which can be used according
The textile industry's requirements for compressed air are not only the oil content in the air, but also water and impurities. However, in these three items, the oil is more difficult to completely filter, so the quality of the gas used can be said to determine the grade of a textile enterprise. So
When the pressure of the air compressor decreases, the flow rate may indeed increase. This phenomenon can be explained by the following aspects: the relationship between pressure and flow definition and measurement unit: pressure is usually measured in psi or bar, while flow is measured in cubic feet per minute (CFM) or vertical
To deal with the excessive moisture generated by the air compressor, you can start from many aspects. The following are some specific solutions: Optimize the post-processing equipment: replace or regularly replace the air compressor cooler to reduce the exhaust temperature and water content, thereby Improve the work of the cold dryer
Air consumption is a key consideration when selecting an air compressor. Air consumption refers to the air flow required by the compressed air system during production, usually measured in cubic meters per minute (m & sup3;/min) or standard cubic feet per minute (scfm). Root
The air blown by the air compressor can be divided into oil and oil-free. The main difference between them is the oil content in the compressed air. During the compression process of the oil air compressor, the lubricating oil will be in direct contact with the air, so the compressed air will contain a certain amount
The oil content of 0.01ppm means that there is only one part of oil in one million parts, that is, the oil content is very low and almost negligible. The ppm(parts per million) is a unit of concentration that expresses parts per million. This low oil content standard
Scroll compressors and screw compressors are two common types of compressors, which are often used in industrial production in the fields of air compression, gas transportation and refrigeration. Performance Comparison of Scroll Compressor and Screw Compressor
The service life of compressed air storage tank is not uniform. It is affected by many factors, including the material of the air storage tank, manufacturing process, design pressure, and operating environment. First of all, the material of the gas tank has an important influence on its service life. For example, carbon steel gas storage
In the process of food processing, the gas exposed to the product needs to meet a series of requirements to ensure the safety and quality of the food. The following are some of the main gas requirements: Purity requirements: The gas should be of high purity to avoid the introduction of impurities or contaminants. especially
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
