2026-04-09Views：
Maintenance knowledge one:
minor maintenance only needs to replace the air compressor oil and oil filter, which is usually replaced after 500 hours of operation of the new machine. Major maintenance is carried out about 3000 hours of operation of the machine, and the air filter element of the air compressor, oil and gas separator core, motor grease, etc.
Maintenance knowledge two:
generally, the first maintenance of a new machine is 500 hours, and the second maintenance is about 2000 hours, which can be determined by the specific use environment. Time is not fixed, but if the environment is too bad, it is best to maintain it in advance. If the environment is good, it can be slightly delayed.
Maintenance knowledge three:
the first maintenance is for the machine to run for 500 hours, followed by no maintenance for 2000-3000 hours. Replace the three filters (air filter, oil filter, oil and gas separator) and oil!
Maintenance knowledge four:
air compressor daily maintenance]
1. After the new machine is used for 500 hours, the oil grid and the special oil for the screw machine need to be replaced;
2. Replace maintenance consumables every 2000 hours: oil and gas separator, oil grid, style and oil.
3. Pay attention to the belt tightness, oil level, display status on the display panel, check temperature, noise, etc.
4. The machine should choose a place with good ventilation, sufficient light, dry, clean air and less dust.
5. After the machine has been running for a period of time, check the safety valve, thermostat, solenoid valve, radiator and other accessories that are easy to cause the machine to malfunction, and register and deal with it in time.
Maintenance knowledge five:
how often is the air compressor maintained? This screw air compressor is generally maintained according to the following conditions
after the newly bought screw air compressor is used for a period of time, it is necessary to carry out routine maintenance. Maintenance is divided into minor maintenance and major maintenance. Minor maintenance only needs to replace the air compressor oil and oil filter, which is usually replaced after the new machine runs for 500 hours. In addition to replacing these two kinds of major maintenance, the air compressor air filter element, oil and gas separator core, motor grease, etc. This maintenance is carried out about 3000 hours after the machine operation, specific depends on the working environment, the environment is very dirty, such as a lot of dust, it is necessary to shorten this time.
Air compressor maintenance is to make the machine can better run in the best condition. Just like car maintenance, if the maintenance is good, the machine failure rate will be greatly reduced, which not only saves the time and effort caused by frequent maintenance, but also prolongs the service life of the air compressor. Therefore, the maintenance of the air compressor must be done well at ordinary times, and do not loathe to give up the maintenance money. Otherwise, when the carbon deposit of the main engine bites this kind of fault, it will cost a lot.
To answer this question, it depends on what brand you buy, how big cubic screw air compressor, the smaller the machine, the lower the maintenance cost, on the contrary, the cost is large; domestic brand screw air compressor maintenance costs relative to imported brand air compressor, maintenance prices are also much more affordable. Therefore, before you buy a screw air compressor, you must understand these contents and know fairly well. After all, the use cost is the large cost of the air compressor running for several years and the proportion of more than ten years.
In the forging industry, the air compressor is like a tireless "pneumatic assistant", providing continuous and stable power for the production of forgings. Imagine those hot metal blanks, gradually deformed under the blow of the forging hammer, and finally became exquisite
In the semiconductor industry, the air compressor of Shanghai Granklin Group is used, and the oil-free water lubrication technology is adopted. This type of air compressor replaces traditional lubricating oil through water lubrication, eliminating the risk of oil pollution from the source, ensuring the absolute purity of compressed air, and fully meeting the high standards of air quality in semiconductor production.
There is a close relationship between the air compressor set exhaust pressure and the load. This relationship is mainly reflected in the following aspects: 1. definition and associated exhaust pressure setting: The exhaust pressure setting of the air compressor refers to the user According to actual needs, in the air compressor control system
The pressure of air compression pipeline in clean area workshop should be determined comprehensively according to industry specifications, equipment requirements and system efficiency. The following is specific guidance: 1. conventional pressure range Pharmaceutical/electronic industry: The pressure of compressed air pipeline in clean area is usually 5-7 bar (gauge pressure). Food
Analysis of Oil Content in Atmospheric Environment and Compressed Air Oil content in atmospheric environment is usually at a very low level, and the specific value is affected by geographical location, environmental conditions and other factors. In a clean outdoor environment, the amount of oil in the air (mainly from motor vehicle exhaust, industrial
The shutdown sequence of the air compressor and the cold dryer shall be: close the air compressor first, and then close the cold dryer after the system pressure is released. The specific steps and reasons are as follows: Close the air compressor 1. to the shutdown sequence and steps: Press the air compressor stop button, and the equipment will gradually stop.
Oil-free compressors and oil-free compressors are two different types of compressors, which are significantly different in terms of working principle, operating environment and maintenance. 1. working principle Oil-free compressor: No lubricating oil is used in the compression process, so
Air compressors are usually not recommended to be placed directly outdoors, while cooling towers must be placed outdoors. The specific analysis is as follows: Environmental damage caused by air compressors placed outdoors: Air compressors are directly exposed to the outdoor environment and are vulnerable to sun exposure, Rain water immersion and dust intrusion, this
The compressed air pressure generally used by plant equipment will be determined according to the specific application requirements and equipment specifications. However, the following common air pressure ranges can be summarized: Conventional industrial applications: Generally speaking, the pressure of compressed air used in industry is generally
Difference Analysis of Water Injection Screw and Oil Injection Screw Air Compressor Screw air compressors can be divided into two categories according to lubrication and cooling medium: water spray screw and oil injection screw. The core differences are reflected in the lubrication method, applicable scenarios and environmental performance. The following is specific
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
