2026-04-15Views：
Air compressor displacement refers to the volume of air that the equipment can compress and discharge per unit time, usually expressed in cubic meters per minute (m & sup3;/min) or cubic feet per minute (CFM). This indicator reflects the theoretical supply capacity of the equipment, I .e. the total amount of compressed air that the air compressor can deliver to the air consumption system per minute.
The displacement volume is determined by the structural parameters of the air compressor, such as the cylinder working volume and speed. In actual work, the exhaust volume should be considered together with the working pressure: under the same working pressure, the larger the exhaust volume, the more compressed air provided by the equipment per unit time, which is suitable for scenarios that require a large amount of continuous gas consumption, such as factory pneumatic production lines or sand explosion rust removal operations.
It should be noted that there is a difference between the exhaust volume and the actual output flow, which is affected by factors such as pipeline resistance and gas equipment status. Appropriate redundancy shall be reserved according to the total demand of gas equipment during selection to ensure stable operation of the system.
There are significant differences between screw compressors and scroll compressors in many aspects, which are mainly reflected in the structure, working principle, performance characteristics and application scenarios. Structural contrast screw compressor: mainly composed of a pair of intermeshing male and female rotors (screw), which
The vibration generated in the operation of the screw air compressor should be very small. If the vibration is large, you need to find out the reason. There are many reasons for the large vibration of the air compressor, such as the following: 1. The basic design and construction quality are not up to standard, resulting in insufficient rigidity,
In chip manufacturing, the redundancy of compressed air system design should be determined comprehensively according to the fluctuation of gas demand, equipment reliability requirements and process stability requirements. Usually, the configuration scheme of combined operation spare capacity of multiple equipment is adopted. Oil-free water lubrication air compressor has become one of the core equipment of redundancy design due to its characteristics of no oil pollution and low maintenance cost.
Under normal circumstances, the air compressor lubricating oil is not recommended to be replaced by oil, but it can be replaced in a short period of time in specific low-requirement scenarios, while the high-pressure high-power air compressor is strictly prohibited. The specific analysis is as follows: the reason why substitution is not recommended is the difference in performance requirements: air compressor oil: specially designed for air pressure
The reasons for the widespread use of air compressors on the construction site can be summarized as follows: 1. provide power support to drive pneumatic tools: air compressors can provide stable air pressure for pneumatic tools on the construction site, such as pneumatic drills, pneumatic screwdrivers, spray guns, Pneumatic conveying system
In the dust place, whether the air compressor room needs explosion-proof is an important issue. The following is an analysis of this problem: the risk of dust explosion: combustible dust can be mixed with air to reach a certain concentration under certain conditions (such as ignition source, etc.)
The oil content standard of oil injection air compressor may vary according to different models and uses, but in general, for oil injection screw air compressor, the oil content of compressed air is usually not more than 3ppm (that is, the oil content in compressed air is not more than 3 mg per cubic meter)
The oil content of oil-free air compressors is usually 0.01ppm. This is a very low oil content, so that the air produced by the oil-free air compressor during the compression process is almost free of oil. In some special applications, such as hospitals, laboratories, schools and other institutions, due to the air
Compressed air has different requirements for cleanliness in different usage scenarios. Some places require almost no oil in the air, and almost no dust. Some places require a little looser, but not too dirty. We can understand these different requirements in the order from the cleanest to the most common.
Compressed air plays a vital role in the pharmaceutical production workshop. Its use is extensive and strict, which is directly related to the quality, safety and production efficiency of drugs. The following are the core uses and key requirements of compressed air in pharmaceutical production workshops: 1. core uses
2018 Granklin Group. All rights reserved 沪ICP备18000439号-2
